Husky HOTC8422BB1M - Assembly

66
H
AA
K
Assembly
Attaching the side handle
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□
□
Attach the side handle (B) to the cabinet using four bolts
(BB).
Tighten all bolts with the 10 mm wrench (CC).
□

1

2
Do not over tighten the bolts to avoid damage to the finish.
3
Attaching the power strip brackets
□
Attach the power strip brackets (H) to the cabinet for both
sides using two bolts (AA) each.
Tighten all bolts using a screwdriver.
□
Do not over tighten the bolts to avoid damage to the finish.
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□
Installing the drawer liners
□
Place the drawer liners (K) in appropriately-sized drawers
to protect the surface.
CC
BB
B