Husky XAKC9032 - User Manual

To Next Page

WARNING:

KEEPYOURDATEDPROOFOFPURCHASEFORWARRANTYPURPOSES

IMH100303AV---E/S06/11

SAVETHISMANUALFORFUTUREREFERENCE

DistributedBy:

HomeDepotU.S.A.,Inc.

2455PacesFerryRd,N.W.Atlanta,GA30339

Sidentrodelañoapartirdelafechadecompra,estaherramienta

neumáticaHuskypresentaradosfalladebidoaundefectoenlos

materialesoenlamanodeobra,llamedeinmediatoalCentrodeServicio

deProductosal1-866-676-8468(8a.m.a5p.m.horaestándardelEste,

delunesaviernes,exceptodíasferiados).Nodevuelvalaherramienta

neumáticaalatienda.Esté preparadoparaenviarelproducto,franqueo

prepagado,juntoconunacopiadelrecibodecompraconlafechaenla

queseadquirió elproductoyelmodelodelaherramientaa:PRIME

GLOBALPRODUCTS,INC.Dirección:201RopemillParkway,suite#1,

Woodstock,GA.30188.Unproductodefectuososerá reemplazadocon

unonuevodeigualomayorvalor.Estagarantíaexcluyedaños

accidentalesoresultantesyfallasdebidoamaluso,abusoodesgaste

debidoalusonormal.Estagarantíaleotorgaderechosespecíficos,pero

podríatenertambiénotrosderechosquevaríansegúnelestado.Llame

alparamásinformación.1-866-676-8468

GARANTÍAS

GARANTÍASLIMITADADE2AÑOS

MODEL:XAKC9032

FailuretofollowwarningscouldresultinDEATHORSERIOUSINJURY.

Main Page

Need help?

Do you have a question about the Husky XAKC9032 and is the answer not in the manual?

This document describes the Husky 18 GA. 1-1/4" Stapler, model XAKC9032, a pneumatic stapler designed for various fastening tasks.

Function Description

The Husky 18 GA. 1-1/4" Stapler is a pneumatic fastening tool used for driving 18-gauge staples up to 1-1/4 inches in length. Its primary function is to secure materials together, commonly in woodworking, upholstery, and other construction or DIY projects. The stapler operates by connecting to an air compressor, which provides the necessary pressure to drive the staples. It features a sequential firing mode, meaning the trigger must be pulled for each staple driven, ensuring controlled and precise fastening. The tool is designed for ease of use and aims to provide efficient and reliable performance for both professional and home users.

Important Technical Specifications

Model: XAKC9032
Staple Gauge: 18 GA.
Staple Length: 1/2" to 1-1/4" (12.7 mm to 31.75 mm)
Air Inlet: 1/4 inch NPT
Magazine Capacity: 100 fasteners
Operating Pressure: 70-100 PSI (4.8-6.9 bar)
Maximum Pressure: 100 PSI
Weight: 2.6 lbs (1.17 kg)
Dimensions: 10.04" (25.5 cm) length, 10.04" (25.5 cm) height, 2.05" (5.2 cm) width
Adjustable Exhaust: 360-degree adjustable exhaust allows the user to direct air away from debris.
Oil-Free Design: This feature eliminates the need for daily lubrication of the piston, reducing maintenance and preventing oil stains on work surfaces.
Aluminum Cylinder and Magazine: Provides durability and a lightweight design.
Comfort Grip Handle: Ergonomically designed body with a rubber grip for enhanced comfort and reduced fatigue during extended use.
Air Filter: Keeps interior components debris-free, extending the tool's lifespan.
Adjustable Depth: Easily adjustable for various fastening depths.
Quick-Jam Release: Provides easy access for clearing jams, minimizing downtime.
Contact Safety: Eliminates damage to the working surface.

Usage Features

The stapler is designed with several features to enhance usability and safety:

Adjustable Depth Control: A depth adjustment wheel allows users to easily set the desired staple depth, ensuring flush fastening or countersinking as needed for different materials and applications.
Sequential Firing Mode: This mode requires the user to depress the work contact element against the workpiece and then pull the trigger for each staple. This helps prevent accidental firing and provides greater control, reducing the risk of injury and damage to the workpiece.
360-Degree Adjustable Exhaust: The exhaust port can be rotated to direct expelled air away from the user and the work surface, preventing dust and debris from being blown into the user's face or onto the project.
Quick-Jam Release Mechanism: In the event of a staple jam, the magazine features a quick-release latch (E) that allows for easy access to clear the jam, minimizing downtime and frustration.
Comfort Grip: The handle is ergonomically designed with a rubber overmold to provide a secure and comfortable grip, reducing user fatigue during prolonged use.
Easy Loading Magazine: The bottom-load magazine is designed for quick and easy loading of 18-gauge staples, accommodating up to 100 fasteners.
No-Marring Pad: A non-marring tip is included to protect delicate work surfaces from impressions or damage caused by the tool's nose.
Swivel Air Connector: The 1/4" NPT air inlet connector is designed to swivel, allowing for greater maneuverability and reducing hose tangling during operation.

Maintenance Features

To ensure the longevity and optimal performance of the Husky 18 GA. 1-1/4" Stapler, several maintenance features and recommendations are provided:

Oil-Free Design: This stapler is designed to operate without the need for daily lubrication of the piston, simplifying maintenance and preventing oil stains on work surfaces. However, the manual recommends lubricating the trigger and other moving parts with a few drops of pneumatic tool oil before each use if the tool is not oil-free. For this specific model, the oil-free design means less frequent lubrication is needed.
Air Filter: The integrated air filter helps to keep internal components free from dust and debris, which can otherwise cause wear and reduce efficiency. Regular cleaning or replacement of the air filter is recommended to maintain optimal performance.
Regular Cleaning: It is important to keep the tool clean, especially the magazine and nose area, to prevent debris from interfering with staple feeding and firing. Using a clean, dry cloth is recommended.
Storage: When not in use, the stapler should be stored in a clean, dry place, away from extreme temperatures and humidity, to prevent corrosion and damage.
Troubleshooting Guide: The manual includes a comprehensive troubleshooting section that helps users identify and resolve common issues such as air leakage, misfires, jams, and loss of power. This guide provides possible causes and corrective actions, enabling users to perform basic repairs and maintenance.
Work Contact Element (WCE) Maintenance: Regular inspection and cleaning of the WCE are crucial. The WCE should move freely and without sticking. If it sticks, it should be cleaned and lubricated (if applicable for non-oil-free parts) to ensure proper operation and safety.
Antidust Cap: The tool is equipped with an anti-dust cap on the air connector to protect it from debris when not in use.
Lubrication (for specific parts): While the piston is oil-free, the manual suggests lubricating specific components like the trigger and other moving parts with pneumatic tool oil to ensure smooth operation, especially if the tool is not entirely oil-free. For this model, specific lubrication instructions should be followed carefully.
Professional Service: For complex issues or repairs beyond basic troubleshooting, the manual recommends seeking service from a qualified service person or an authorized service center to ensure safety and proper functioning.