Need help?Do you have a question about the Husqvarna Viking Prelude 370 and is the answer not in the manual?
General| Type | Mechanical |
|---|---|
| Built-in Stitches | 21 |
| Buttonhole Styles | 1 Four-Step |
| Needle Threader | Yes |
| Max Stitch Length | 4 mm |
| Max Stitch Width | 5 mm |
| Free Arm | Yes |
| Stitch Options | Utility, Decorative |
| Presser Feet | Snap-on |
| Machine Type | Sewing Machine |
| Bobbin Type | Front-loading |
Guide to removing the sewing machine from its packaging and initial setup.
Instructions for properly storing the sewing machine and its accessories.
Steps for connecting the foot control to the sewing machine.
Guide on how to connect the sewing machine to an electrical power source.
Details on opening, using, and storing accessories in the accessory box.
Information on attaching the accessory box for an extended work surface.
Explanation of the main and auxiliary spool pins and their uses.
Step-by-step guide to threading the upper thread of the sewing machine.
Instructions for winding thread onto a bobbin using the sewing machine.
Guide for winding a bobbin using the vertical spool pin.
Instructions for inserting the wound bobbin into the bobbin case.
How to test and identify proper thread tension for sewing.
Guide to replacing the needle and swapping presser feet.
Details on adjusting presser foot pressure and using the lever.
How to use the reverse stitch function for securing seams.
Instructions on lowering the feed teeth for specific sewing tasks like darning.
Using the guide for choosing stitches based on sewing techniques.
How to adjust the stitch width for various stitch patterns.
Guidance on setting the stitch length for different sewing applications.
Guidance on choosing stitches based on fabric types like woven, stretch, leather, and vinyl.
How to sew buttonholes using the specific buttonhole foot.
Instructions for sewing buttons onto fabric using the machine.
Method for safely cutting open sewn buttonholes.
Information on using the straight stitch for seams and topstitching.
How to use the clearance plate for sewing over thick seams.
Step-by-step guide for sewing a lapped zipper.
How to use the reinforced straight stitch for strength and elasticity.
Adjusting needle position for edge stitching and hemming.
Using zigzag for lace, edgings, and appliqués.
Using three-step zigzag for overcast edges and mending.
Techniques for sewing loosely woven fabrics like terry cloth.
Using stitches for seaming and overcast edges on various fabrics.
How to create an invisible hem using the blind hem stitch and foot.
Using flatlock for overlapped seams, decorative hems, and gathering.
Instructions for gathering fabric and attaching ruffles.
Guide for sewing accurate 1/4 inch seams for quilting.
Using the transparent foot for decorative stitches and appliqués.
Sewing difficult fabrics like plastic, leather with the non-stick foot.
Introduction to decorative stitches available on the model 370.
How to create additional stitches by adjusting width on the guide.
Step-by-step guide for replacing the sewing machine light bulb.
General advice on keeping the sewing machine in good working order.
Instructions for cleaning lint and debris from the bobbin area.
Guide on how to remove and reattach the stitch plate.
Initial troubleshooting for needle issues and breakage.
Common causes and solutions for stitches that are not neat or uniform.
Troubleshooting steps for upper thread breakage issues.
Identifying and fixing causes of knotted thread and bobbin problems.
How to resolve fabric puckering and feeding issues.
Troubleshooting machine sluggishness due to lint build-up.
To Next Page