Why is my Husqvarna Viking Huskylock 905 breaking threads?
Thread breakage can occur due to several reasons. The machine might be improperly threaded, so re-threading is recommended. Also, the thread tension(s) may be too tight, requiring a reset. Finally, the needle tension setting might be incorrect, suggesting a reset or a needle replacement.
Why is my Husqvarna Viking Huskylock 905 skipping stitches?
Skipping stitches may occur if the needle is bent or blunt, suggesting you insert a new needle. The needle might also be inserted incorrectly, so try resetting it. Improper threading can also cause this issue, so re-thread the machine.
What to do if my Husqvarna Viking Huskylock 905 is puckering the fabric?
Puckering can happen if the needle thread tensions are too tight, so you should loosen them. Improper threading may also be the cause, thus re-threading the machine is advisable. Another potential reason is the need for differential feed; in this case, set the differential feed to 0.5-N.
What to do if Husqvarna Viking Sewing Machine does not feed properly?
If the machine isn't feeding fabric correctly, the pressure on the presser foot might be insufficient; increase it by setting the lever to 5. Also, the differential feed might not be set correctly, so adjust it.
What to do if my Husqvarna Viking Sewing Machine needle breaks?
If the needle breaks, it might be due to a bent or blunt needle, in which case you should insert a new one. Another cause could be incorrect needle insertion, so try resetting it. Also, pulling the fabric while sewing can cause the needle to break, so avoid pulling the fabric.
General| Type | Serger |
|---|---|
| Differential Feed | Yes |
| Needle System | ELx705 |
| Needles | 2 |
| Stitch Options | Overlock, Rolled Hem, Flatlock |
| Speed | Up to 1300 stitches per minute |
| Threading | Color-coded threading guide |
| Presser Feet | Snap-on |
| Number of Threads | 2, 3, or 4 |
Precautions to prevent electric shock, including unplugging the machine and handling the cord properly.
General warnings to prevent burns, fire, electric shock, or injury, especially concerning children and proper machine use.
Step-by-step guide on how to safely remove and insert needles, including recommended needle system.
Detailed steps for changing threads, including tying new threads and using thread nets/spool holders.
Instructions for threading the upper looper, including guidance for decorative thread.
Guidance on adjusting thread tension dials to achieve correct stitch balance and troubleshooting common issues.
Explanation of the sewing machine's display panel buttons and their functions in Auto Mode.
Instructions for using Auto Mode, with recommended settings for fabric types and stitches.
Introduction to Manual Mode for altering AUTO settings and storing custom preferences.
How to store and retrieve custom sewing settings using the Memory Mode.
Steps for performing a four-thread overlock stitch, including threading and inserting fabric.
Instructions for performing a three-thread overlock stitch by removing one needle.
Guide to setting up and performing a two-thread overlock stitch using the 2-thread converter.
Methods for sewing a flatlock stitch, including decorative and ladder stitch variations.
To Next Page