Why does the needle break on my Husqvarna Viking Sewing Machine?
- FflongJul 31, 2025
Several factors can cause the needle to break on your Husqvarna Viking Sewing Machine. Check these possible causes: * The needle might have been installed incorrectly; make sure to install it correctly. * The needle clamp screw could be loose; use a screwdriver to firmly tighten the screw. * You might be pulling the fabric too much; lightly guide the fabric instead. * The upper thread tension might be too tight; loosen the upper thread tension. * You may be using an incorrect bobbin; use only a bobbin specifically designed for your machine.