To Next PageTo Next PageWhat to do if my Husqvarna 122HD45 blade moves slowly?
If the blade on your Husqvarna Trimmer moves slowly or not at all, it could be because the blade is blocked or damaged. Clean any unwanted materials from the blades. If the blade is damaged, replace it.
Why does my Husqvarna 122HD45 blade become hot?
If the blade of your Husqvarna Trimmer becomes hot, it is likely due to friction between the blades. Remove any burrs from the blade and lubricate it.
What to do if Husqvarna Trimmer blade does not cut easily?
If the blade on your Husqvarna Trimmer does not cut easily, it might not be sharp or it could be damaged. Sharpen the blade. If the blade is damaged, replace it.
What to do if Husqvarna 122HD45 Trimmer has incorrect fuel type?
General| Engine Displacement | 21.7 cm³ |
|---|---|
| Power Output | 0.6 kW |
| Maximum Power Speed | 7800 rpm |
| Blade Length | 45 cm |
| Knife Teeth Opening | 28 mm |
| Weight | 4.7 kg |
| Engine Type | 2-stroke |
| Fuel Tank Volume | 0.3 liters |
Identifies all major parts of the hedge trimmer with labels.
Key advice for safe machine operation.
Introduction to essential protective gear.
Details on hearing, eye, hand, and foot protection.
Guidance on suitable clothing and first aid kit.
Importance of checking machine safety features.
How to use the throttle lock and stop switch.
Safety checks for hand guard and vibration damping.
Safety considerations for the muffler.
Safety aspects of blades, guards, and gear housing.
General safety rules when handling fuel.
Guidelines for safely transporting and storing fuel.
Information on recommended fuel and oil mixture.
Steps for safely refueling the machine.
Essential checks before starting the engine.
Step-by-step guide for starting the hedge trimmer.
Specific procedure for starting a warm engine.
How to safely turn off the engine.
Basic safety and operational advice for working.
Precautions for the surrounding work environment.
Tips for safe operation during use.
Methods for effective hedge trimming.
How to adjust the handle on the 122HD60 model.
Safety steps after finishing work.
How to adjust the idle speed of the carburetor.
Care and checks for the muffler.
How to clean the machine's cooling system.
Factors affecting spark plug condition and maintenance.
How to clean and oil the air filter.
How to lubricate the gear housing.
Checking tightness of cutting unit screws.
Cleaning blades and lubricating blade bars.
Schedule of maintenance tasks based on usage.
Detailed specifications for models 122HD45 and 122HD60.
Explanation of the emission control system warranty.
Owner's duties for warranty coverage.
Details on what the manufacturer covers under warranty.
Duration of the warranty for the engine/equipment.
Specifics on covered repairs and parts.
Owner's cost for diagnostic labor.
Manufacturer's liability for related damages.
