Need help?Do you have a question about the Husqvarna 122 HD60 and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Engine Displacement | 21.7 cm³ |
| Power Output | 0.6 kW |
| Cutting Width | 60 cm |
| Weight | 4.8 kg |
| Displacement | 21.7 cm³ |
| Fuel Tank Volume | 0.3 l |
| Fuel Tank Capacity | 0.3 l |
| Shaft Type | Straight |
Steps for disassembling the starter assembly and its components.
Procedures for reassembling the starter motor and its parts.
Diagnosing ignition issues by checking for spark presence and quality.
Detailed steps for dismantling and inspecting the carburettor.
Adjusting the carburettor for optimal idle and high-speed operation.
Common fuel system issues and their solutions.
Cleaning and inspecting cylinder and piston for wear and damage.
Diagnosing and addressing cylinder and piston failure causes.
Procedures for separating the crankcase halves and removing crankshaft.
Checking the crankshaft for wear, damage, and bearing condition.
Steps for reassembling the crankshaft and crankcase.
Technical details for engine displacement, bore, stroke, and output.
To Next Page
