Need help?Do you have a question about the Husqvarna 136, 141, 136LE, 141LE and is the answer not in the manual?
Details key components and parts of the Husqvarna chainsaw model.
Explains the meaning and importance of various safety symbols used in the manual.
Steps for preparing and planning before operating the chainsaw.
Guidelines for operating the chainsaw safely to prevent injuries.
Ensuring the chainsaw is maintained for safe and effective use.
Critical safety measures for handling and storing chainsaw fuel.
Defines rotational and pinch kickback, their causes, and potential injuries.
Tips and techniques to avoid specific kickback scenarios.
Strategies and practices to minimize the risk of kickback.
Techniques for maintaining balance and control of the chainsaw during use.
Highlights the severe danger of kickback and the need for user vigilance.
Details on guide bars and chains designed to lessen kickback.
Explains how the chain brake works and how to engage/disengage it.
Explanation of CKA values and their impact on saw safety.
Important notices on vibration, muffler use, and industry standards.
Step-by-step instructions for assembling the guide bar and chain.
Procedure for properly setting and checking chain tension.
Instructions for safe fuel mixing and refueling procedures.
Importance and methods for lubricating the guide bar and chain.
Detailed steps for starting cold, warm, and difficult engines.
How to use and disengage the chain brake while operating.
Key points and techniques for effective and safe cutting.
Safety precautions and methods for felling trees safely.
Specific techniques for felling trees with larger diameters.
Explanation of different cuts for bucking, including overcutting and undercutting.
Methods to avoid the saw getting pinched in the log during bucking.
Techniques for cutting logs that are not supported.
Methods for cutting logs using supports or stands.
Safe procedures for removing branches from a felled tree.
Precautions for pruning, limiting work to shoulder height.
Overview of maintenance checks and their frequency.
Instructions for cleaning and replacing the air filter for optimal performance.
Procedure for adjusting the carburetor for engine performance.
Steps for cleaning and maintaining the guide bar.
Recommendations for chain sharpening and tool usage.
Procedure for replacing the spark plug for engine health.
Steps to take before storing the chainsaw, including fuel draining.
Guidelines for storing the chainsaw safely to prevent hazards.
Solutions for common engine starting and idling problems.
Addressing issues like poor acceleration, lack of power, or stalling.
Details on warranty periods, covered parts, and general terms.
Information on conditions that are not covered by the warranty.
Explanation of Husqvarna's obligations under the warranty policy.
Listing of parts and conditions excluded from warranty coverage.
Owner's responsibilities for maintaining warranty validity.
Outlines owner's responsibilities and rights for emission control warranty.
Specifies emission-related parts covered and the warranty duration.
Procedure for initiating and obtaining warranty service for emission parts.
To Next Page
General
