Need help?Do you have a question about the Husqvarna 240R and is the answer not in the manual?
General| Shaft Type | Straight |
|---|---|
| Starter System | Recoil |
| Cutting Width | Not found |
| Vibration Level | Not found |
| Sound Pressure Level | Not found |
Explains the various symbols used in the operator's manual for safety and identification.
A welcoming message to the customer, introducing the Husqvarna product and its history.
Identifies and describes the various components of the 240R clearing saw.
Identifies and describes the various components of the 240F clearing saw.
Identifies and describes the various components of the 250R clearing saw.
Identifies and describes the various components of the 252RX clearing saw.
Identifies and describes the various components of the 265RX clearing saw.
General advice on safe operation and responsibility.
Details on essential protective gear like helmets, hearing, and eye protection.
Explains the purpose and checks for the machine's safety features.
Describes the function and operation of the throttle lockout and stop switch.
Explains the purpose and importance of the cutting attachment guard.
Details the vibration damping system and quick release mechanism.
Information on muffler maintenance and safety aspects.
Instructions on using and tightening locking nuts and screws.
General safety rules to follow when using cutting attachments.
Instructions on how to sharpen grass cutters and grass blades correctly.
Detailed instructions for sharpening saw blades for efficient and safe operation.
Information and precautions for using and maintaining the trimmer head.
Step-by-step guide to assembling the handlebar and throttle.
Instructions for fitting the handlebar on different models.
How to adjust the handlebar for transport and storage.
Guide to adjusting the throttle trigger for optimal working position.
Crucial steps for correctly assembling the cutting attachment.
Steps for fitting the guard, grass blade, and grass cutter.
Procedure for fitting the blade guard and saw blade correctly.
Guide to fitting the trimmer guard and trimmer head.
Instructions for fitting various other guards and cutting attachments.
How to adjust the harness and connect the clearing saw for safe operation.
Details on adjusting and using different types of harnesses.
Step-by-step guide to adjusting the harness for proper fit and load distribution.
How to achieve correct balance for operation.
Essential safety precautions when handling fuel to prevent fire and injury.
Information on gasoline types, octane ratings, and two-stroke oils.
Step-by-step instructions for mixing gasoline and two-stroke oil.
Precautions and procedures for safely refueling the machine.
Essential pre-operation checks to ensure safe and proper starting.
Detailed procedures for starting and stopping the engine correctly.
Comprehensive guide to starting the machine's engine safely and effectively.
Instructions on how to stop the engine using the ignition switch.
General advice and precautions for operating clearing saws and trimmers.
Fundamental safety rules to ensure safe operation and prevent accidents.
Describes different approaches to clearing tasks.
Detailed techniques for performing forestry clearing with a saw blade.
Techniques for efficient brush cutting using a saw blade.
Methods for clearing grass using a grass blade.
Techniques for trimming grass effectively with a trimmer head.
Using the trimmer head's fan effect for clearing debris.
Information and procedures for carburetor function and adjustment.
Initial carburetor settings recommended for the machine.
Procedure for adjusting the low speed jet for specific models.
How to fine-tune idle speed and adjust high speed jets.
Maintenance specifics for the 265RX model.
Maintenance and safety information for the muffler and cooling system.
Importance of air filter maintenance, cleaning, and oiling.
Checking and maintaining the grease level in the bevel gear.
How to check, clean, and replace the spark plug.
A comprehensive schedule of daily, weekly, and monthly maintenance tasks.
Specifications for the 240R and 240F models.
Specifications for the 250R, 252RX, and 265RX models.
List of approved cutting attachments and guards for 240R and 240F.
List of approved cutting attachments and guards for the 250R.
List of approved cutting attachments and guards for the 252RX.
List of approved cutting attachments and guards for the 265RX.
Details your rights and responsibilities concerning the product warranty.
Information on warranty coverage and owner's maintenance responsibilities.
How to file a claim and what is not covered by the warranty.
Steps for installing the trimmer head and assembling new cord.
Guide to cord adjustment and list of spare parts.
Details on fitting spacer and circlip for specific Trimmy S models and serial numbers.
Step-by-step guide for assembling and operating the Trimmy S II trimmer head.
Detailed instructions for assembling and operating the Auto 55 trimmer head.
Step-by-step guide for assembling the Tri Cut cutting attachment.
To Next Page