Need help?Do you have a question about the Husqvarna 252RX and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Power Output | 2.4 kW |
| Fuel Tank Volume | 0.8 l |
| Line Diameter | 2.4 mm |
| Shaft Type | Straight |
| Vibration Level | 4.5 m/s² |
| Starter System | Recoil starter |
Defines various symbols used in the manual for safety and operation.
A message of congratulations and introduction to the Husqvarna product.
Identifies parts of the 240R clearing saw with a numbered diagram.
Identifies parts of the 240F clearing saw with a numbered diagram.
Identifies parts of the 250R clearing saw with a numbered diagram.
Identifies parts of the 252RX clearing saw with a numbered diagram.
Identifies parts of the 265RX clearing saw with a numbered diagram.
Key warnings, essential safety advice, and required protective gear.
Describes safety features like throttle lockout and stop switch.
Information on cutting guards, vibration systems, and quick release.
Safety advice regarding the muffler and locking nut/screw.
Guidelines for choosing, using, and maintaining cutting attachments safely.
Instructions on sharpening saw blades and using trimmer heads safely.
Steps for assembling and fitting the handlebar for various models.
Adjusting handlebar for transport, throttle, and assembling cutting equipment.
Steps to fit blade guards with grass cutters and saw blades.
Steps for fitting trimmer guards and trimmer heads.
How to adjust the harness for standard and Triobalance systems.
Detailed steps for adjusting harness straps and ensuring correct balance.
Precautions for handling fuel, transport, and recommended fuel types.
Detailed steps for mixing fuel and safe refueling practices.
Essential checks before starting and the initial starting steps.
Detailed procedures for starting and stopping the engine safely.
Basic safety rules and preparing the work area.
Techniques for felling trees using a saw blade, including blade thrust.
Methods for brush cutting with saw blades and grass clearing.
Using the trimmer head for trimming, clearing, cutting, and sweeping.
Explanation of carburetor function and basic adjustment procedures.
Detailed steps for adjusting low speed jet, high speed jet, and idle speed.
Final carburetor checks, muffler care, and cooling system maintenance.
Procedures for cleaning/oiling air filter and checking bevel gear.
Checking, cleaning, and replacing the spark plug.
A detailed schedule of daily, weekly, and monthly maintenance tasks.
Detailed technical specifications for models 240R and 240F.
Detailed technical specifications for models 250R, 252RX, and 265RX.
List of approved accessories and their part numbers for various models.
Overview of owner's rights, responsibilities, and warranty coverage.
To Next Page
