Need help?Do you have a question about the Husqvarna 253 RB and is the answer not in the manual?
Explains various safety and operational symbols shown on the machine and in the manual.
Warns about permanent hearing impairment from long-term noise exposure.
Warns against unauthorized modifications and accessories causing injury or death.
Warns that the machine is dangerous if used incorrectly, causing serious or fatal injury.
Welcomes the customer and provides historical background on Husqvarna products.
Identifies and lists all the parts of the brush cutter with corresponding numbers.
Provides crucial general safety information and warnings for operating the machine.
Details essential personal protective equipment (PPE) such as helmets, hearing, and eye protection.
Specifies required footwear and advises on appropriate clothing for safe operation.
Recommends a first aid kit and explains the machine's safety features and checks.
Describes the function and operation of the throttle lockout mechanism for safety.
Explains the safe use of the stop switch and the importance of the cutting attachment guard.
Details the vibration damping system and the muffler's role in noise and exhaust management.
Explains the correct use of the locking nut and checks for harness integrity.
Outlines general rules for using cutting attachments and recommended guards.
Provides instructions on how to correctly sharpen grass cutters and blades.
Provides important advice and instructions for using trimmer heads and cords safely.
Step-by-step instructions for attaching the flexible drive shaft to the machine.
Details how to connect the throttle cable and stop switch wires from the engine.
Instructions for mounting the J-handle onto the shaft for comfortable operation.
Explains how to correctly fit cutting attachments and associated guards.
Guides on attaching the guard extension for specific cutting attachments.
Details the process of fitting blade guards, grass blades, and grass cutters.
Explains how to attach the trimmer guard and trimmer head correctly.
Instructions for fitting the transport guard to protect the cutting attachment.
Covers adjusting the harness and brush cutter for a comfortable fit.
Details how to adjust the backplate height for optimal harness fitting.
Step-by-step guide to putting on and adjusting the harness for a secure fit.
Provides steps for adjusting chest, shoulder, and waist straps for optimal harness fit.
Essential safety precautions for handling fuel, including risks of fire and inhalation.
Guidelines for safely transporting and storing the machine and fuel.
Information on the correct type of petrol and oil mixture for the machine.
Details the recommended two-stroke oil and mixing ratios.
Provides instructions on how to correctly mix petrol and two-stroke oil.
Step-by-step guide for safe refuelling, including precautions against fire.
Lists essential checks to perform before starting the machine to ensure safety.
Introduces the procedures for starting and stopping the engine.
Detailed instructions on how to start the machine's engine safely.
Explains how to set the choke control for engine starting.
Details the procedure for safely stopping the engine.
Provides fundamental safety precautions and general advice for operating the brush cutter.
Lists essential safety rules to follow while working with the machine.
Advises on proper working techniques, such as idling the engine and avoiding over-revving.
Explains the technique for clearing grass using a grass blade, including safe movements.
Details techniques for trimming and clearing grass with a trimmer head.
Describes specific methods for trimming, clearing, and cutting grass with the trimmer head.
Describes the sweeping technique for clearing debris using the rotating trimmer cord.
Instructions for adjusting the carburettor's idle speed.
Guidance on cleaning and maintaining the air filter.
How to check and clean the fuel filter for blockages.
Information on checking and lubricating the bevel gear.
Steps for lubricating the flexible drive axle.
Guidance on checking, cleaning, and replacing the spark plug.
A comprehensive schedule outlining daily, weekly, and monthly maintenance tasks.
Detailed technical specifications for the engine, including displacement and speed.
Specifies ignition system components and fuel tank capacity.
Reports measured noise emissions and vibration levels at the handles.
Lists approved accessories with their corresponding part numbers and types.
Declares that the product complies with relevant EU directives and standards.
To Next Page
General
