SAFETY INSTRUCTIONS
4. Vibration
damping system
Your machine is equipped
with a vibration damping
system, which is designed
to give as vibration-free
and comfortable use as
possible.
Use of incorrectly wourrd
cord or incorrect cutting
equipment increasas the
level of vibration.
The machine's vibration
damping system reduces
the transfer of vibrations
between tile engine unit/
cutting equipment and the
machine's handle unit.
5. Muffler
The muffler is designed to
give the lowest possible noise
level and to direct the engine's
exhaust fumes away from the
operatol: Muffier fitted with
catalytic converter is also
designed to reduce harmful
exhaust components.
In countries that have a warm
and dry climate the risk of fire
is obvious. We have therefore
fitted celtain mufflers with a
spark arrest screen. Make sure
that your muffler is fitted
with this kind of screen.
It is extremely important that
the instructions for checking,
maintaining and servicing the
muffler are followed. {see the
section "Control, maintenance
and service of the machine's
safety equipment _).
6. Cutting
equipment
The trimmer head is
intended for trimming
grass.
7. Locking nut
A locking nut is used to
secure some types of cutting
equipment on the output
shaft.
//////////
English - 5
To Next Page
Loading...
Need help?
General