To Next Page
M
Matthew JohnsonAug 8, 2025
What to do if the Error LED flashes red on my Husqvarna Brush Cutter?
- GgarcherAug 9, 2025
If the Error LED flashes red on your Husqvarna Brush Cutter, it could be due to several reasons: * **Overload:** The cutting attachment may be jammed. Deactivate the product, remove the battery, and clean the cutting attachment. * **Temperature Deviation:** The product may need to cool down. * **Simultaneous Button Press:** You may be pressing the power trigger and the activate button at the same time. Release the power trigger to activate the product.
General
