Need help?Do you have a question about the Husqvarna 325RDX Series and is the answer not in the manual?
Explains the meaning of various symbols used in the operator's manual for safety and operation.
Identifies and labels the various parts of the clearing saw and their functions.
Highlights critical safety warnings and general precautions for operating the machine.
Details the required personal protective equipment for safe operation of the clearing saw.
Describes the machine's safety features and how to check and maintain them.
Explains the throttle lockout mechanism and how to check its proper operation.
Details how to use the stop switch to safely turn off the engine.
Information on the cutting attachment guard, its purpose, and checking for damage.
Explains the vibration damping system and its importance for operator comfort and safety.
Describes the quick release feature for emergency situations and how to check it.
Information on the muffler, its function, and safety precautions related to heat and exhaust.
Details the locking nut used for securing cutting attachments and its proper use.
Guidance on choosing, using, and maintaining cutting equipment safely.
Details different cutting attachments (blades, cutters) and their sharpening procedures.
Instructions for correctly sharpening grass cutters and blades for optimal performance.
Guidance on sharpening saw blades for efficient cutting and safety.
Information on using trimmer heads, cord winding, and maintenance for optimal use.
Step-by-step instructions for fitting the handlebar to the 323R model.
Step-by-step instructions for fitting the handlebar to the 325RX and 325RDX models.
Instructions for correctly assembling cutting attachments to the machine.
Guide on fitting the blade guard, grass blade, and grass cutter.
Instructions for fitting the blade guard and saw blade assembly.
Steps to fit the trimmer guard and the Superauto II trimmer head.
Instructions for fitting various other guards and cutting attachments.
Guidance on adjusting the harness and balancing the clearing saw for optimal use.
Details on adjusting the standard harness, including quick release, load distribution, and height.
Essential safety rules and warnings for handling fuel and preventing hazards.
Information on the correct type of petrol and oil mixture for the engine.
Details on the correct type of two-stroke oil and mixing ratios for the engine.
Step-by-step guide on how to correctly mix petrol and two-stroke oil.
Instructions and safety warnings for refuelling the machine to prevent fires.
Essential checks to perform before starting the engine to ensure safety and proper function.
Detailed instructions on how to safely start and stop the engine.
How to correctly stop the engine using the stop switch.
Explanation of the start throttle lock function for easier starting.
Details the part throttle dial for controlling engine speed during operation.
Basic safety precautions and general advice for working with clearing saws and trimmers.
Fundamental safety rules to follow while operating the machine.
Describes working methods, blade thrust risks, and how to avoid them.
Instructions for safely and effectively clearing trees using a saw blade.
Guidance on cutting brush and thin stems using a saw blade.
Instructions for clearing grass using a grass blade, including technique and safety.
Techniques for trimming grass with a trimmer head, including trimming, clearing, and cutting.
Explains the carburettor's function and basic/fine adjustment procedures.
Details the factory basic settings for the carburettor and initial adjustments.
Instructions for fine-tuning the carburettor for optimal performance.
Procedure for adjusting the idle speed screw (T) for correct engine idling.
Guide to adjusting the high-speed jet (H) for optimal engine power and speed.
How to adjust the start throttle speed for easier engine starting.
Information on cleaning and maintaining the muffler, including catalytic converter and spark arrestor.
Instructions for cleaning the cooling system to prevent overheating.
Guidance on checking and lubricating the bevel gear.
Detailed steps for cleaning, oiling, and replacing the air filter.
Instructions for lubricating the drive shaft on the two-piece shaft models.
Guide to checking, cleaning, and replacing the spark plug for optimal engine starting.
A comprehensive list of maintenance tasks and their recommended frequency (daily, weekly, monthly).
Detailed technical specifications for the engine, including displacement, bore, stroke, and speeds.
Specifications for the ignition system, including manufacturer and spark plug details.
Details on the carburettor type and fuel tank capacity.
Weight specifications for the machine without fuel and cutting attachment.
Measured and guaranteed sound power levels for the machine.
Equivalent noise pressure levels at the operator's ear.
Measured vibration levels at the handles under different operating conditions.
List of approved accessories, including cutting attachments and their part numbers.
Declaration confirming compliance with relevant European directives and standards.
To Next Page
General