and how checks and
maintenance should be carried
out to ensure that it operates
correctly. See instructions
under the heading
Introduction
on page 2
to find where these
parts are located on your
product.
•
The life span of the product
can be reduced and the risk of
accidents can increase if
product maintenance is not
carried out correctly and if
service and/or repairs are not
carried out professionally. If
you need further information
please contact your nearest
servicing dealer.
•
Never use a product with
defective safety components.
The product's safety
equipment must be inspected
and maintained as described
in this section. If your product
fails any of these checks,
contact your service agent to
get it repaired.
•
All servicing and repair work
on the product requires special
training. This is especially true
of the product′s safety
equipment. If your product fails
any of the checks described
below you must contact your
service agent. When you buy
any of our products we
guarantee the availability of
professional repairs and
service. If the retailer who sells
your product is not a servicing
dealer, ask him for the
address of your nearest
service agent.
To do a check of the functions
of the user interface
1. Push and hold the Start/Stop
button (A).
a)The product is on when
the LED (B) is on.
b)The product is off when
the LED (B) is off.
2. Refer to
Troubleshooting on
page 18
if the warning
indicator (C) is on or flashes.
1166 - 002 - 29.10.2019
11
To Next Page
Loading...
Need help?
General