Centrifugal Clutch
On 242 models, install rim sprocket on clutch
drum.
Install clutch drum on crankshaft. Thread clutch
counterclockwise onto crankshaft. Clutch
assembly must be secure on crankshaft. Apply
grease to needle bearing through hole in
crankshaft. Remove piston stop. Install spark
plug and cylinder cover. Install bar, chain and
clutch cover.
- WARNING -
Never start chain saw without
bar chain and clutch cover
installed. The clutch could
come loose and cause severe
injury
28
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
To Next Page
Loading...
