To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna 450 and is the answer not in the manual?
General| Engine Power | 3.2 hp |
|---|---|
| Cylinder Displacement | 50.2 cm³ |
| Bar Length | 13-20 in |
| Vibration Level (left/right) | 3.1/4.9 m/s² |
| Sound Pressure Level | 104 dB(A) |
| Warranty | 2 years |
| Fuel Tank Volume | 0.45 l |
| Chain Pitch | 0.325 in |
| Oil Tank Volume | 0.26 l |
Advises on operator protection, proper attire, and emergency awareness.
Covers safe practices for the operational environment, including fuel and ventilation.
Details safe handling, guards, modifications, and fuel leaks.
Stresses inspection, correct blade type, and safe mounting for blades.
Step-by-step guide for installing the diamond blade and skid plate.
Procedures for starting the engine and allowing it to warm up.
How to line up cuts and adjust blade depth for sawing.
Critical warnings during saw operation, including fuel leaks and unattended machines.
Solutions for saw spalling and ravelling cuts.
Troubleshooting rough running, backfires, and speed problems.
Diagnosing and resolving engine starting failures.
Addressing problems with the saw pulling to one side during cutting.
