Why does my Husqvarna 450 Rancher engine start but stop again?
Your Husqvarna Chainsaw engine might start and then stop due to several reasons. It could be due to incorrect fuel type, in which case you should drain the fuel tank and refill it with the correct fuel. Alternatively, try cleaning or replacing the air filter, or replacing the fuel filter.
What to do if my Husqvarna Chainsaw engine does not start?
If your Husqvarna Chainsaw engine doesn't start, several factors could be the cause. The starter pawls might be blocked, requiring adjustment or replacement. Make sure that you use the correct fuel type. If the fuel tank has chain oil, drain it, or contact your servicing dealer if you already tried to start the chainsaw. The spark plug might be dirty or wet, so ensure it is clean and dry. Also, verify that the electrode gap is correct and that the spark plug is tightened correctly.
General| Engine Power | 3.2 hp |
|---|---|
| Cylinder Displacement | 50.2 cm³ |
| Vibration Level (Left/Right Handle) | 3.1/4.9 m/s² |
| Bar Length | 13 to 20 inches |
| Chain Pitch | 0.325" |
| Chain Gauge | 0.050" |
| Fuel Tank Volume | 0.45 l |
| Oil Tank Volume | 0.26 l |
Details the Husqvarna 445, 450 Rancher chainsaw models and their forest service applications.
Explains the meaning of various symbols found on the chainsaw for safe operation and identification.
Defines warning, caution, and note usage, and provides essential general safety guidelines for chainsaw operation.
Covers crucial safety measures for operating the chainsaw, including kickback avoidance and proper handling.
Details the function and importance of safety features like the chain brake, throttle lockout, and chain catcher.
Provides safety guidelines related to the muffler, fuel handling, and potential hazards like exhaust fumes.
Covers safety aspects for maintenance procedures and safe cutting techniques to prevent accidents.
Step-by-step instructions for correctly attaching the guide bar and saw chain to the chainsaw.
Essential function checks to perform before starting the chainsaw to ensure safe and proper operation.
Guidance on using the correct fuel mixture, filling the fuel tank, and using appropriate chain oil.
Explains what kickback is, how it occurs, and provides methods to prevent it for safer chainsaw use.
Detailed procedures for starting the chainsaw with cold and warm engines, and how to safely stop it.
Describes various cutting techniques including pull/push strokes, using the spiked bumper, and cutting trunks.
Provides instructions and safety considerations for felling trees, limbing branches, and managing tension.
Explains the 'safe corner method' and making directional cuts for controlled tree felling operations.
Guidelines and precautions for operating the chainsaw in cold weather conditions, including winter covers.
Outlines daily, weekly, and monthly maintenance tasks for the chainsaw to ensure longevity and performance.
Procedures for checking the functionality and condition of critical safety devices on the chainsaw.
Instructions for checking the muffler, adjusting idle speed, and examining carburetor settings.
Guidance on replacing worn starter ropes and cleaning the air filter for optimal engine performance.
Detailed steps for sharpening saw chain cutters and adjusting chain tension for efficient cutting.
Instructions for checking the guide bar, spur sprocket, needle bearing, and chain lubrication system.
Procedures for maintaining the air cleaning system and cleaning the cooling system for engine health.
Diagnoses common issues when the engine fails to start or stops unexpectedly, with suggested solutions.
Provides key technical data for the Husqvarna 445 and 450 Rancher models, including engine and weight.
Lists recommended guide bar and saw chain combinations for optimal performance and safety compliance.
Information on how guide bar nose radius affects kickback and recommended specifications.
Details on using Husqvarna file gauges for correct filing angles to maintain saw chain sharpness.
Explains the US and Canadian emissions control system warranty for small off-road engines.
Defines manufacturer coverage and owner responsibilities for warranty claims and maintenance.
Outlines what is covered under warranty, including parts, labor, and warranty period commencement.
Information on how to file a warranty claim, where to get service, and what is not covered.
General safety precautions for chain saw users, emphasizing proper handling and work area safety.
Specific measures to prevent kickback, including grip, avoiding obstacles, and cutting techniques.
Covers other critical safety aspects like one-handed operation, fatigue, fuel handling, and tree cutting.
To Next Page
