Why does my Husqvarna Chainsaw engine start but stop again?
Your Husqvarna Chainsaw engine might start and then stop due to several reasons. It could be due to incorrect fuel type, in which case you should drain the fuel tank and refill it with the correct fuel. Alternatively, try cleaning or replacing the air filter, or replacing the fuel filter.
What to do if my Husqvarna Chainsaw engine does not start?
If your Husqvarna Chainsaw engine doesn't start, several factors could be the cause. The starter pawls might be blocked, requiring adjustment or replacement. Make sure that you use the correct fuel type. If the fuel tank has chain oil, drain it, or contact your servicing dealer if you already tried to start the chainsaw. The spark plug might be dirty or wet, so ensure it is clean and dry. Also, verify that the electrode gap is correct and that the spark plug is tightened correctly.
General| Engine displacement | 45.7 cm³ |
|---|---|
| Weight (excluding cutting equipment) | 4.9 kg |
| Fuel tank volume | 0.45 l |
| Sound power level | 114 dB(A) |
| Chain pitch | 0.325 in |
| Chain gauge | .050" |
Provides a detailed overview of the chainsaw model.
Specifies the chainsaw's designed application and operational limits.
Explains safety and operational symbols found on the chainsaw.
Defines warning, caution, and note terminology used in the manual.
Provides essential safety guidelines for operating the chainsaw.
Key guidelines for safe operation of the chainsaw.
Details required safety gear for chainsaw operation.
Covers critical safety features like chain brake, guards, and switches.
Highlights precautions related to the chainsaw's muffler.
Provides essential guidelines for safe handling and storage of fuel.
Outlines safety precautions to be taken during maintenance.
Details safety measures for saw chains and guide bars.
Explains kickback causes, prevention, and safety precautions.
Addresses frequently asked questions regarding kickback scenarios.
Step-by-step instructions for attaching the guide bar and saw chain.
Ensures all parts function correctly before starting the chainsaw.
Details about the two-stroke engine, fuel requirements, mixing, and filling.
Ensures a clear escape route during tree felling operations.
Methods for safely removing a caught chainsaw from a tree.
Techniques for safely cutting wood under tension or stress.
Guidance for operating the chainsaw in cold weather conditions.
Steps to prepare the chainsaw for starting when cold.
Steps to prepare the chainsaw for starting when warm.
Detailed steps for safely starting the chainsaw engine.
Procedure for safely shutting down the chainsaw engine.
Explains various cutting methods including strokes, spiked bumper, and trunk cutting.
Regular checks and cleaning to perform each day.
Checks and cleaning to perform on a weekly basis.
Checks and cleaning to perform on a monthly basis.
Procedures for checking the functionality of safety devices.
Procedure for inspecting the chainsaw muffler for defects.
How to adjust the engine's idle speed for proper lubrication.
Verifying the carburetor is correctly adjusted for performance.
Steps for replacing a broken or worn starter rope.
Instructions for assembling the starter housing onto the product.
Procedure for cleaning the chainsaw's air filter.
Guidance on checking and maintaining the spark plug.
Comprehensive guide on sharpening the saw chain for optimal performance.
How to adjust the depth gauge for optimal cutting performance.
Steps to properly adjust the tension of the chainsaw's saw chain.
Procedure to verify the saw chain is receiving sufficient oil.
Procedures for checking and lubricating key chainsaw components.
Guidance on cleaning fuel/oil tanks and the engine's cooling system.
Diagnoses and solutions for engine starting issues.
Troubleshoots common causes for the engine stopping intermittently.
Steps to prepare the chainsaw for extended periods of storage.
Details on engine displacement, power, and idle speed.
Information on spark plugs, fuel tank, and oil capacity.
Product weight and recommended guide bar lengths.
Data on drive sprocket type and saw chain speed.
Lists approved guide bar and saw chain combinations for the model.
Information on guide bar nose radius and kickback considerations.
Details on the Pixel combination for efficiency and narrow cuts.
Information on file gauges and correct filing angles for sharpening.
Explains warranty for exhaust and evaporative emissions systems.
Details when the warranty starts and its duration.
Outlines the owner's duties for maintaining warranty coverage.
Specifies covered parts, EPA compliance, and warranty periods.
Safety guidelines for chain saw users based on ANSI B175.1-2012.
To Next Page