26 Instruction book Lily 555/545
Look through the program
Functions
CLR - Deleting stitches
If you wish to delete a certain stitch
within the program:
1. In the PROG position, use one
of the buttons until the
actual stitch number is displayed.
2. Touch CLR. Now the stitch and
everything to the right of it will
be deleted.
3. If you wish to delete the whole
program, touch the FUNC button
to return to PROG. The machine
will be positioned at the fi rst pro-
grammed stitch.
4. Touch CLR. CLR deletes the pro-
gram of stitches in the selected
menu.
If you by mistake touch CLR, simply
touch CLR again to bring back the
balance of your program as long as
you have not used another button.
When the program memory is empty
the stitch length and width is shown
as 0.0/0.0 on the display.
Letters are deleted in the same way.
If you have programmed several of
the memories you can press FUNC
for PROG or REP. Use the M but-
ton to select the following memory
and then advance with the buttons
.
The memory last used will appear
on the display when you select
PROG or REP.
To Next Page
Loading...
