27Instruction book Lily 555/545
These stitches can only be selected
in NORM position. They can not be
programmed or combined but are
set individually and automatically.
There are stitch memories where the
number of stitches, length or width
changes are stored.
1. Sew until the stitch has reached
the desired length.
2. Touch the
button. The ma-chi-
ne now completes the stitch.
3. When you have the result you
wish, touch STOP.
4. The stitch will now repeat in
succession and the machine will
stop automatically when the stitch is
completed
If you wish to sew another stitch
and then return to your stitch, you
only select this stitch and touch
STOP.
The repeated stitch is retained even
if you switch off the machine.
If you attempt to program these
stitches in the PROG position, the
stitch number is fl ashing to indi-
cate that this is not possible.
Darning and taper satin stitches
Functions
Model 555
Stitches 28-30
Model 545
Stitches 37-38
To Next Page
Loading...
