Husqvarna 572XPG - Contents; Table of Contents

CONTENTS
English –
3
Contents
KEY TO SYMBOLS
Symbols on the machine: ..................................... 2
Symbols in the operator’s manual: ....................... 2
CONTENTS
Contents ............................................................... 3
INTR ODUCTION
Dear Customer , .................................................... 4
WHA T IS WHAT?
What is what on the chainsa w? ............................ 5
GENERAL SAFETY PRECA UTIONS
Bef ore using a new chainsaw ............................... 6
Important .............................................................. 6
Always use common sense .................................. 7
Personal protective equipment ............................. 7
Machine ′ s safety equipment ................................. 7
Cutting equipment ................................................ 10
ASSEMBL Y
Fitting the bar and chain ....................................... 17
FUEL HANDLING
Fuel ...................................................................... 18
Fueling .................................................................. 19
Fuel safety ............................................................ 19
ST ARTING AND STOPPING
Star ting and stopping ........................................... 20
W ORKING TECHNIQUES
Bef ore use: ........................................................... 22
General working instructions ................................ 22
How to avoid kickback .......................................... 29
MAINTENANCE
Gener al ................................................................. 30
Carburettor adjustment ......................................... 30
Checking, maintaining and servicing chainsaw
saf
ety equipment .................................................. 30
Muffler .................................................................. 32
Starter housing ..................................................... 33
Air filter ................................................................. 34
Spark plug ............................................................ 35
Needle bearing lubrication ................................... 35
Adjustment of the oil pump ................................... 35
Cooling system ..................................................... 36
”Air Injection” centrifugal cleaning ........................ 36
Winter use ............................................................ 36
Heated handles .................................................... 37
Trouble shooting ................................................... 38
Maintenance schedule ......................................... 39
TECHNICAL D ATA
T echnical data ...................................................... 40
Recommended cutting equipment ........................ 41
Filing equipment and filing angles ........................ 41
EC Declaration of Conformity ............................... 42