Husqvarna 62522SH - Page 19

19
ROTARY LAWN MOWER - - MODEL NUMBER 62522SH (96143000905) - PRODUCT NUMBER 961 43 00-09
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your lawn mower and void your warranty.
1 532 40 73-16 Drive Control Assembly (Includes Cable)
2 532 41 16-73 Cover, Drive Control, Top
3 532 40 62-82 Pulley
4 532 19 00-39 Lever, Drive Control
5 532 41 16-64 Cover, Drive Control, Bottom
6 532 18 16-98 Screw, Torx Head #8 x 5/8
7 532 40 07-23 Mounting Bracket, Drive Control
8 532 40 62-59 Cable, Drive Control
10 532 18 93-78 Decal, Drive Control
11 532 41 10-81 Wheel & Tire Assembly
12 812 00 00-58 E-Ring
13 532 40 38-49 Gear, Pinion
14 532 18 94-03 Dust Cover
15 532 19 10-17 Drive Pawl
16 532 06 77-25 Washer, Flat 3/8
17 532 19 10-39 Bearing, Wheel Adjuster
18 532 19 64-01 Selector Knob
25 532 41 16-63 Belt Keeper
26 532 16 34-09 Screw, Hi-Lo Thread #12 x 5/8
27 532 17 52-62 Pan Head Tapping Screw #10-24 x 2-3/4
28 532 19 73-70 Drive Cover
29 532 40 91-48 Locknut, Hex
32 532 19 40-18 Drive Pulley
33 532 19 68-57 V-Belt
35 532 40 88-62 Kit, Wheel Adjuster, LH
(Includes Knob and Bearing)
36 532 40 48-34 Gear Case Assembly, Complete
38 873 80 04-00 Locknut, Hex 1/4-20
40 532 40 65-58 Spring
41 532 40 88-61 Kit, Wheel Adjuster, RH
(Includes Knob and Bearing)
54 532 41 06-83 Grassbag Assembly
57 532 40 74-54 Frame, Grassbag
61 532 41 07-26 Case, Upper
62 532 41 07-28 Shaft, Output
63 532 18 35-08 Seal, Output Shaft
64 532 18 35-11 Bushing
65 532 18 35-09 Washer
66 532 18 35-14 Seal, Worm Shaft
67 532 18 35-06 Bearing, Ball
68 532 41 07-29 Gear, 28 Teeth
69 532 41 07-32 Fixed Dog Clutch
70 532 41 07-33 Pin
71 532 41 07-30 Movable Dog Clutch
73 532 18 35-13 Screw, Case
74 532 41 07-34 Case, Lower
78 532 41 07-31 Spring, Leaf
79 532 41 07-27 Shaft, Worm
KEY PART
NO. NO. DESCRIPTION
KEY PART
NO. NO. DESCRIPTION