17
This operator’s manual describes the Husqvarna Zero
Turn Rider. The rider is tted with a Briggs & Stratton
four-stroke overhead valve engine.
Control Locations
Transmission from the engine is made via belt-driven
hydraulic pumps. Using the left and right steering
controls, the ow is regulated and thereby the
direction and speed.
8050-002
Cutting height handle1.
Park brake2.
Throttle / choke control3.
Ignition switch4.
Blade control lever5.
Motion control levers6.
Fuel tank7.
Fuel shut off valve8.
Bypass linkage9.
To Next Page
Loading...
