Husqvarna 967 672501-00 User Manual

115 94 30-27 Rev. C
Operator Manual
Manual del operador
Manuel d'utilisation
V548 / 967 672501-00
Please read the operator manual carefully and
make sure you understand the instructions
before using the machine.
Gasoline containing a maximum of
10% ethanol (E10) is permitted for use
in this machine. The use of gasoline
with more than 10% ethanol (E10)
will void the product warranty.
Lea el manual de instrucciones detenidamen-
te y asegúrese de comprender las instruccio-
nes antes de utilizar la máquina.
Se permite usar gasolinas que contengan un
máximo de 10 % de etanol (E10) en esta má-
quina. El uso de gasolina con más de 10 % de
etanol (E10) anulará la garantía del producto.
Lire attentivement le manuel de l'opérateur
et vous assurer de bien comprendre les
instructions avant d'utiliser la machine.
Il est possible d’utiliser de l’essence
contenant un maximum de 10 % d’éthanol
(E10) avec cette machine. L’utilisation
d’essence contenant plus de 10 % d’éthanol
(E10) annulera la garantie du produit.

Husqvarna 967 672501-00 Specifications

General

Engine Type	Kawasaki FR Series
Cutting Width	54 inches
Weight	770 lbs
Engine Displacement	726 cc
Cutting Deck Material	Steel
Cutting Height	1.5 - 4 inches
Deck Material	Steel
Transmission	Hydrostatic
Fuel Tank Capacity	3.5 gallons
Wheel Size	Front: 8 inches, Rear: 16 inches

Summary

SYMBOLS AND DECALS

SAFETY

Safety Instructions and Warnings

Critical safety guidelines for operation and general warnings.

Protecting Children and General Operation

Safety advice regarding children and general operating practices.

Slope Operation and Gasoline Handling

Safety protocols for operating on slopes and handling gasoline.

CONTROLS

Steering, Operator Presence, Ignition, Throttle, Choke, Blade Controls

Detailed explanations of steering, operator presence, ignition, throttle, choke, and blade controls.

OPERATION

Starting, Running, and Stopping Procedures

Step-by-step instructions for starting, operating, and shutting down the mower.

MAINTENANCE

Maintenance Schedule

A comprehensive schedule for all required maintenance procedures.

Belt and Pulley Maintenance

Instructions for maintaining V-belts, deck drive belts, and related pulleys.

Deck Belt, Tire Pressure, and Deck Adjustments

Procedures for deck belt installation, tire pressure, and deck adjustments.

Park Brake and Neutral Adjustments

Procedures for adjusting the park brake and neutral settings.

LUBRICATION

Lubrication Schedule and General Guidelines

Engine Oil and Component Lubrication

Transaxle Fluid and Hydraulic System

STORAGE

SCHEMATIC

TECHNICAL DATA

Torque Specifications and Hardware Data

SERVICE JOURNAL

After 10 Hours and Daily Service Records

50-Hour Service Records

250-Hour Service Records

500-Hour Service Records

Annual Service Records