To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna 968999268 and is the answer not in the manual?
General| Model | 968999268 |
|---|---|
| Cutting Deck Material | Steel |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge | Yes |
| Engine Type | Gasoline |
Lists the specific Husqvarna mower models covered by this operator's manual.
Welcome message and introduction to the value of the operator's manual.
Defines directional terms like left, right, backward, and forward used in the manual.
Provides guidance on road traffic regulations and safe transport of the machine.
Details the intended use of the machine and emphasizes safe operation by trained personnel.
Information on Husqvarna's service network and dealer support.
Explains where to find the machine, engine, and hydraulic component manufacturing numbers for service.
Explains symbols indicating risks of personal injury, material damage, or misuse.
Illustrates common operational symbols, controls, and specific safety pictograms.
Emphasizes reading and understanding the operator's manual before starting.
Stresses operator familiarity with controls and clearing the work area of hazards.
Warns against carrying passengers and the need to watch for obstacles and people.
Advises on operating in daylight, avoiding hazards, and not operating while impaired.
Warns about hazardous chemicals in exhaust and engine components, requiring ventilation.
Details the importance of using approved personal protective equipment for injury reduction.
Outlines essential rules for safe operation on slopes, including avoiding side-to-side mowing.
Provides specific instructions for starting, stopping, turning, and driving on slopes.
Warns about uneven terrain, ditches, banks, and wet grass affecting machine stability.
Provides critical safety measures to prevent accidents involving children near the machine.
Warns against starting the engine with safety features disabled during maintenance.
Details precautions for fueling, including avoiding indoor fueling and handling flammable fuel.
Advises on safe refueling practices, allowing the engine to cool, and handling spills.
Warns about battery acid hazards and explosive gases, emphasizing safe handling and ventilation.
Stresses not modifying safety equipment and ensuring all protective devices are functional.
Emphasizes proper ventilation and stopping to inspect/repair after hitting an object.
Covers safe handling of blades and regular checks of the parking brake functionality.
Provides essential safety guidelines for transporting the heavy machine securely on vehicles.
Details critical warnings and instructions for the proper use and limitations of the ROPS.
Outlines customer responsibilities for reading safety rules and following maintenance schedules.
Specifies the need for a spark arrester on the engine for certain land types and its maintenance.
Introduces the mower and the importance of understanding safety and operational directions.
Identifies and labels key components of the Husqvarna ride-on mower shown in the diagram.
Basic instructions for setting up the machine after uncrating.
Step-by-step guide for assembling the Roll Over Protection System (ROPS).
Details the required tire pressure for all four tires.
Instructions for adjusting the control arms for proper neutral position alignment.
Steps for installing the seat assembly onto the machine frame and connecting the harness.
Guidance on checking the engine oil level using the dipstick.
Procedure for adjusting the cutting height of the mower deck.
Instructions for leveling the mower deck for optimal cutting performance.
How to adjust the tension of the throttle lever for proper operation.
Procedure for adjusting the motion control linkage for straight machine tracking.
Detailed steps for adjusting the park brake to ensure proper engagement and disengagement.
Guidelines for the proper use of the roll bar and seat belt for operator safety.
Steps for safely starting the engine and engaging basic operation features.
Explains how to use the motion control levers for steering and movement.
Details the function and operation of the blade switch, choke, throttle, and parking brake.
Describes the key switch for starting and the hour meter for tracking operation time and service.
Explains how to use pump release valves and the fuel shut off valve for system control.
Details the function of the tracking knob for fine-tuning straight-line operation.
Reiterates the safety rule that no adjustments should be made with the engine running.
Guidance on checking engine oil daily and referring to the engine manual for specifics.
Instructions for inspecting, sharpening, or replacing mower blades for optimal performance.
Details daily checks for the safety interlock system to ensure proper functioning.
Instructions for greasing the cutter housings on a weekly or 40-50 hour interval.
Daily inspection of hardware and reference to engine manual for air filter service.
Guidance on checking hydraulic oil level and changing oil/filter per schedule.
Procedure for checking deck belt for wear and instructions for replacement.
Critical safety warning about checking for hydraulic leaks using appropriate materials, not hands.
Instructions for checking and replacing the pump belt.
Details lubrication, tire pressure checks, and caster wheel tightening procedures.
Guidance on fuel filter replacement and preparing the machine for winter storage.
Lists specific torque values for various fasteners and components on the machine.
Details daily, 25, 50, 100, 200, 250, and 500 hour maintenance tasks for engine and hydraulics.
Covers maintenance checks for electrical systems, lubrication points, and general items.
Lists potential causes for the engine failing to start.
Addresses problems with the machine not moving or blades not engaging.
Identifies causes for uneven cuts, ragged cuts, and machine vibration.
Diagram illustrating the main electrical circuits including relays, switches, and controls.
Details wiring for the key switch positions, seat switch, and accessory outlet.
