To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna CR 125 2011 and is the answer not in the manual?
General| Displacement | 124.8 cc |
|---|---|
| Ignition | CDI |
| Transmission | 6-speed |
| Cooling System | Liquid-cooled |
| Final Drive | Chain |
| Front Tire | 80/100-21 |
| Engine Type | Single-cylinder, two-stroke |
| Bore x Stroke | 54 mm x 54.5 mm |
| Front Suspension | Kayaba 48 mm USD forks |
| Rear Suspension | Kayaba shock absorber |
| Front Brake | Single disc |
| Rear Brake | Single disc |
| Lubrication System | Premix |
Lists controls on the left handlebar commutator for WR models.
Details the gear shift lever operation, neutral, and shifting methods.
Lists essential checks before operating the motorcycle.
Step-by-step guide for breaking in the engine properly.
Items to monitor while the engine is being run in.
Step-by-step process for starting a cold engine.
Steps for draining and refilling transmission oil.
How to check coolant level and important safety warnings.
Instructions for adjusting the throttle cable play.
Process for setting the engine idle speed.
Details spark plug type, gap, cleaning, and condition analysis.
How to inspect and access the air filter element.
Steps for washing, drying, and oiling the air filter.
How to check and maintain the front brake fluid level.
Adjusting the rear brake pedal position relative to the footrest.
Setting the correct idle stroke for the rear brake pedal.
How to check the brake fluid level in the reservoir.
Adjusting suspension for optimal performance on firm surfaces.
Suspension tuning guidelines for sandy terrain.
Adjusting suspension for riding in muddy conditions.
Adjusting fork compression settings for desired damping.
Adjusting fork extension settings for desired rebound.
How to check and maintain the correct oil level in the fork legs.
How to set the rear suspension sag based on rider weight.
Steps for adjusting the rear shock absorber spring preload.
