To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna CTH220TWIN and is the answer not in the manual?
General| Engine Power | 22 hp |
|---|---|
| Cutting Width | 107 cm |
| Transmission | Hydrostatic |
| Deck Material | Steel |
| Engine Manufacturer | Briggs & Stratton |
| Cutting Height | 38 - 102 mm |
| Warranty | 3 years |
| Engine Type | Twin-cylinder |
| Engine Displacement | 656 cc |
Learn and understand controls and proper use of the equipment.
Steps to take before using the machine to reduce risks like fire and injury.
Guidelines for safe and effective use of the machine during operation.
Instructions for keeping the machine in safe working condition and proper storage.
Steps for fitting the steering wheel components onto the tractor.
Instructions for mounting and adjusting the operator's seat.
Procedures for adjusting the bagger assembly for optimal function and appearance.
Adjusting bagger position forward or backward for proper fit.
Adjusting bagger position up or down for proper fit.
Instructions on how to change the mower's function.
Identification and function of all control levers and switches on the tractor.
Operation of the tractor's headlight switch.
Regulating engine speed and blade rotation.
Function of the brake pedal for stopping and starting.
Operating the lever for forward, reverse, neutral, and speed control.
Engaging and disengaging the cutting unit and other attachments.
Adjusting the cutting deck height quickly.
Understanding the different positions of the ignition key.
How to engage and disengage the parking brake.
Engaging or disengaging the transaxle for towing or pushing.
Adjusting the mower deck height for desired cut.
Operating the choke for cold engine starting.
Indicator for required engine and mower maintenance.
Instructions for safely adding fuel to the engine's tank.
How to check and maintain the engine's oil level.
Recommended tire pressure for optimal performance and safety.
Procedures for safely starting the tractor's engine.
Specific instructions for starting the engine in cold weather.
Process to remove air from the transmission for proper operation.
How to use the system that allows mowing in reverse.
Steps to convert the mower for mulching grass.
Steps to convert the mower for rear grass discharge.
Steps to convert the mower for collecting grass clippings.
Daily checks and lubrication required before operating the tractor.
Procedures for cleaning the tractor safely and effectively.
Instructions for raising, removing, and reinstalling the engine hood.
Connecting and disconnecting the headlight wiring.
Steps for draining and refilling the engine oil.
Verifying the safety system that shuts off the engine if the operator leaves the seat.
Verifying the safety system that allows mowing in reverse.
Importance of sharp blades for best cutting results and avoiding damage.
Guidelines for handling, installing, and maintaining mower blades.
Details on the 5-star pattern blade and its installation.
Details on the 6-star pattern blade and its installation.
Adjusting cutting unit front edge for proper height relative to back edge.
Information on transaxle fluid and maintenance requirements.
Common reasons and solutions for an engine failing to start.
Troubleshooting steps if the starter motor does not crank the engine.
Diagnosing and fixing issues causing the engine to run rough.
Identifying causes for reduced engine power.
Addressing problems that cause the engine to overheat.
Solutions for issues related to the battery not charging.
Troubleshooting steps for non-functional lights.
Identifying causes of abnormal machine vibration.
Diagnosing and fixing issues causing uneven grass cutting.
Information needed when ordering replacement parts or requesting service.
