To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna CTH191 and is the answer not in the manual?
General| Engine Manufacturer | Briggs & Stratton |
|---|---|
| Engine Power | 19 HP |
| Engine Displacement | 500 cc |
| Cylinders | 1 |
| Transmission Type | Hydrostatic |
| Cutting Width | 122 cm |
| Cutting Height | 1.5 - 4 in |
| Blade Engagement | Electric |
| Tire Size Front | 15x6-6 |
| Tire Size Rear | 20x8-8 |
Guidelines for safe use of the machine during operation.
Guidelines for machine upkeep and seasonal storage.
Critical safety information regarding the handling of flammable fuel.
Procedure for checking the engine oil level.
Procedure to remove air from the transmission before first use.
Information on the tractor's safety switches and interlocks.
Instructions on how to use the reverse operation system.
Important warning about using the ROS system safely.
Important safety warning regarding driving on slopes.
Essential safety steps before performing any maintenance or repair.
Safety warning before performing any maintenance or repair work.
Step-by-step instructions for changing the engine oil.
Verifying the proper function of safety systems.
Information regarding the cutting blades.
Detailed instructions for removing and installing the blades.
How to verify the functionality of the tractor's brake system.
Steps for disassembling the cutting unit from the tractor.
Steps for reassembling the cutting unit onto the tractor.
Instructions for replacing the drive belt for the cutting unit.
Procedures for adjusting the cutting deck height and leveling.
Diagnosing common reasons why the engine fails to start.
Diagnosing problems related to the starter motor.
Troubleshooting common causes of engine overheating.
Diagnosing problems with the battery not charging.
