To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna CTH130 and is the answer not in the manual?
General| Manufacturer | Husqvarna |
|---|---|
| Model | CTH130 |
| Cutting Height Positions | 6 |
| Deck Material | Steel |
| Transmission | Hydrostatic |
| Engine | Briggs & Stratton |
| Engine Displacement | 344 cc |
| Drive Type | Rear-wheel drive |
| Fuel Capacity | 5.7 l |
| Wheel Size (Front) | 13 inches |
Read instructions carefully, be familiar with controls and proper use.
Wear proper footwear, inspect area, handle fuel safely.
Mow in daylight, avoid slopes, disengage blades, safety checks before leaving.
Instructions for assembling the steering wheel and related components.
Steps for mounting and adjusting the tractor seat.
Procedures for safely installing and connecting the tractor battery.
Guidance on attaching bagger parts to the tractor.
How to adjust the bagger assembly for proper fit and function.
Overview and identification of the tractor's operating controls.
Explanation of the engine speed and choke lever operation.
Description of the combined brake and clutch pedal function.
Operation of the lever for controlling forward, reverse, and neutral movement.
How to connect and disconnect the cutting unit drive.
Mechanism for raising and lowering the cutting unit.
Functionality of the key switch for starting and stopping the engine.
How to engage and disengage the parking brake.
Operation of the lever to allow towing without engine power.
How to adjust the cutting height of the mower deck.
Instructions for refueling the engine with unleaded petrol.
How to check and maintain the correct engine oil level.
Recommended tire pressures for optimal performance and safety.
Procedures for starting the engine, including cold and warm starts.
Procedure to remove air from the transmission for proper operation.
Instructions on lowering the deck, controlling speed, and moving the tractor.
Warnings and precautions for operating the tractor on inclines.
Steps for safely stopping the engine after operation.
Procedures for opening, closing, and removing the engine hood.
Routine checks before use, including oil, bolts, battery, and brakes.
How to drain the engine oil using the oil drain valve.
Importance of sharp blades and how to remove/install them.
How to adjust the cutting unit for optimal cutting results.
Instructions for replacing the drive belt for the cutting unit.
Keeping the transmission fan and fins clean for proper cooling.
Diagnosing and resolving issues when the engine fails to start or turn.
Troubleshooting uneven running, weak power, or overheating.
Diagnosing battery charging and lighting malfunctions.
Addressing machine vibration and uneven cutting results.
Steps to take after the mowing season, including cleaning, oil change, and fuel draining.
Instructions for removing, charging, and storing the battery.
Guidelines for storing the machine indoors in a dry, dust-free environment.
