To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna CTH173 and is the answer not in the manual?
General| Brand | Husqvarna |
|---|---|
| Model | CTH173 |
| Category | Lawn Mower |
| Language | English |
Understand controls, proper use, and training needs for ride-on machines.
Steps to reduce fire risk, prepare the area, and handle fuel safely before use.
Safe operation practices for ride-on mowers, including slope limits and control.
Instructions for keeping the equipment in safe working condition and proper storage.
Instructions for mounting and adjusting the steering wheel assembly.
Procedure for installing the steering wheel extension shaft.
Steps to install the seat onto the tractor pan.
How to adjust the seat for comfortable operator position.
Instructions for installing the tractor battery.
Instructions for attaching the hood vent.
Step-by-step instructions for assembling the grass bagger.
How to adjust the bagger hanger brackets for proper gap.
Procedure for adjusting hanger bracket vertical position.
Procedure for adjusting hanger bracket horizontal position.
Instructions for installing the bagger spring latches.
How to adjust the bagger lever/extension for grass type.
Identifies and describes the location and function of tractor controls.
Instructions for safely filling the fuel tank with unleaded petrol.
How to check and maintain the engine oil level using SAE 30 or 5W-30 oil.
Guidelines for checking and maintaining correct tire pressure.
Procedures for safely starting the tractor engine, including safety switch functions.
Instructions for operating the throttle control for a cold engine.
Instructions for operating the throttle control for a warm engine.
Procedure for turning the ignition key to start the engine.
Procedure for returning the ignition key to 'ON' and setting engine speed.
Procedure to purge the transmission for proper operation before first use.
How to control tractor movement using forward/reverse pedals.
Instructions for lowering and connecting the cutting unit and selecting speed.
How to use the Reverse Operation System (ROS) for repositioning the tractor.
Explanation of operator presence and ROS safety systems and how to check them.
Guidance on safe mowing practices, grass conditions, and cutting results.
Instructions for emptying the grass bagger and disabling the alarm.
Instructions for converting the mower for mulching, rear discharge, or bagging.
Critical safety warnings regarding operation on slopes exceeding 15 degrees.
Steps for safely shutting down the tractor engine.
Safety precautions before servicing the engine or cutting unit.
Instructions for cleaning the tractor, including steering plate.
General safety caution regarding pinch points and moving parts during maintenance.
Instructions for removing and reinstalling the engine hood.
Guidelines for periodic maintenance to ensure good running condition.
Cleaning the tractor, emphasizing avoiding high-pressure washers.
Step-by-step instructions for changing the engine oil.
Service schedule outlining maintenance tasks and recommended intervals.
Information on blade sharpness, sharpening, and care.
Important notes on blade installation and maintenance.
Instructions for removing mower blades.
Details on removing and reinstalling a 5-star pattern blade.
Details on removing and reinstalling a 6-star pattern blade.
Procedure for checking the tractor's brake system.
Instructions for using the deck washout port for cleaning.
Steps for removing the mower deck from the tractor.
Instructions for replacing the mower drive belt.
Instructions for leveling the mower deck side-to-side and front-to-back.
Ensuring the transmission cooling fan and fins are clean for proper cooling.
Instructions for using the deck washout port for cleaning.
Common causes and solutions for the engine failing to start.
Troubleshooting steps when the starter motor does not turn the engine.
Causes and solutions for the engine running unevenly.
Troubleshooting steps for a weak engine performance.
Causes and solutions for engine overheating.
Troubleshooting steps when the battery is not charging.
Troubleshooting steps for non-functioning lights.
Causes and solutions for excessive machine vibration.
Causes and solutions for uneven cutting results.
Steps to follow for proper storage after the mowing season ends.
Information required when ordering parts or requesting service.
