Husqvarna CTH171 User Manual

02228_Husqvarna_CRD
CTH151, CTH171
CTH172, CTH191
Instruction manual
Please read these in struc tions care-
ful ly and make sure you un der stand
them before using this ma chine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorg-
fältig durch und vergewissern Sie sich,
daß Sie diese verstehen, bevor Sie die
Maschine in Betrieb nehmen.
Manuel d’instructions
Merci de lire trés attentivement le
manuel d'instructions. Assurez-vous
d'avoir tout compris avant d'utiliser ce
tracteur.
Manual de las instrucciones
Por favor lea cuidadosamente y com-
prenda estas intrucciones an tes
de usar esta maquina.
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed ac-
certatevi di averle comprese bene.
Instructieboekje
Lees deze instructies aandachtig en
zorg dat u ze begrijpt voordat u deze
ma chine gebruikt.

Husqvarna CTH171 Specifications

General

Engine Manufacturer	Briggs & Stratton
Transmission Type	Hydrostatic
Cutting Height Positions	6
Cutting Width	42 inches
Cutting Height, min-max	1.5-4 inches
Wheel Size	15 inches (front), 18 inches (rear)

Summary

Safety Rules

Operator Training and Skills

Operator training and necessary skills.

Preparation for Operation

Steps to take before operating the mower.

Safe Operating Practices

Safe operating practices for the mower.

Assembly Instructions

Steering Wheel Assembly

Instructions for assembling the steering wheel.

Seat Installation and Adjustment

Instructions for installing and adjusting the mower seat.

Bagger Component Installation

How to install bagger components onto the tractor.

Bagger Assembly

Steps for assembling the bagger unit.

Functional Description of Controls

Control Layout Overview

Identifies the location and function of the mower's controls.

Throttle and Choke Control Operation

Explains the operation of the throttle and choke control lever.

Brake and Clutch Pedal Function

Details the function of the brake and clutch pedal.

Motion Control Lever Operation

Describes the operation of the motion control lever for driving.

Cutting Unit Engagement/Disengagement

How to connect and disconnect the cutting unit.

Cutting Unit Height Adjustment

Method for quickly raising or lowering the cutting unit.

Ignition Lock Operation

Explains the positions and function of the ignition lock.

Parking Brake Engagement

Instructions on how to engage and release the parking brake.

Cutting Height Adjustment

Before Starting Procedures

Fueling the Mower

Engine Oil Level Check

Driving and Mowing

Engine Starting Procedure

Ignition Key Operation for Starting

Hydrostatic Transmission Cold Start

Mower Driving Instructions

Maintenance and Adjustment

Routine Tractor Maintenance

Engine Servicing Guide

Mower Blade Information

Mower Blade Maintenance

Cutting Unit Drive Belt Replacement

Cutting Unit Adjustment

Troubleshooting

Engine Start Failure Troubleshooting

Starter Motor Failure Troubleshooting