Husqvarna CTH194 User Manual

Euro
581 06 99-40 Rev. 2
CTH194
Instruction manual
Please read these in struc tions care ful ly
and make sure you un der stand them before
using this ma chine.
Manuel d’instructions
Merci de lire trés attentivement le manuel
d'instructions. Assurez-vous d'avoir tout
compris avant d'utiliser ce tracteur.
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed ac-
certatevi di averle comprese bene.
Instructieboekje
Lees deze instructies aandachtig en zorg
dat u ze begrijpt voordat u deze ma chine
gebruikt.
Manual de las instrucciones
Por favor lea cuidadosamente y comp-
renda estas intrucciones an tes de usar
esta maquina.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorgfältig
durch und vergewissern Sie sich, daß Sie
diese verstehen, bevor Sie die Maschine
in Betrieb nehmen.

Husqvarna CTH194 Specifications

General

Manufacturer	Husqvarna
Model	CTH194
Transmission	Hydrostatic
Deck Material	Steel
Engine	Briggs & Stratton
Cutting Height, min-max	1.5-4 inch
Tire Size Front	15 x 6.00-6
Drive System	Rear-wheel drive

Summary

Safety Rules

II. PREPARATION

III. OPERATION

Operate safely, follow slope rules, use attachments correctly.

IV. MAINTENANCE AND STORAGE

Assembly

2. INSTALL SEAT

2. TO ASSEMBLE BAGGER

6. To Remove Mower

Step-by-step guide on how to detach the mower deck from the tractor.

6. Assembly of the cutting unit

Instructions for mounting the mower deck onto the tractor.

6. To Replace Mower Drive Belt

Instructions for removing and installing the mower drive belt.

Before starting

4. Filling up

4. Oil level

Procedures for checking and maintaining the engine oil level.

Driving

5. Starting of motor

Step-by-step guide to safely start the tractor engine.

5. To Move Forward and Backward

How to operate the drive pedals for forward, backward, and cutting.

5. Reverse Operation System (ROS)

Safety system for operating the tractor in reverse.

Maintenance, Adjustment

6. To Check Brake

6. To Level Mower

6. MAINTENANCE - TRANSAXLE

Troubleshooting

7. Engine will not start

Common causes and solutions for when the engine fails to start.

7. Engine runs unevenly

7. Uneven cutting results