To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna CTH170 and is the answer not in the manual?
General| Manufacturer | Husqvarna |
|---|---|
| Fuel Type | Gasoline |
| Deck Material | Steel |
| Self-Propelled | Yes |
| Engine Type | 4-Cycle |
| Engine Displacement | 140 cc |
| Grass Collection | Yes |
| Mulching Capability | Yes |
Learn machine controls and proper use. Ensure operator is trained.
Inspect area, handle fuel safely, check components before use.
Operate in safe conditions, follow slope rules, use attachments safely.
Keep equipment tight, store safely, clean engine, check parts.
Mount and adjust the seat for operator comfort and correct posture.
Identify and understand the location and function of all tractor controls.
Regulate engine speed for optimal cutting and driving performance.
Operate brake and clutch pedal for stopping and disengaging the engine.
Select driving speed and direction (forward, reverse, neutral).
Start, run, and stop the engine using the ignition key.
Engage and disengage the parking brake to secure the tractor.
Safely fill the fuel tank with unleaded petrol outdoors, avoiding overfilling.
Check engine oil level and add correct type if necessary.
Start the engine safely after preparing the machine and engaging controls.
Warm up the hydro transmission before driving in cold conditions.
Remove air from the transmission for proper operation and performance.
Safely stop the engine and disengage all systems before leaving the machine.
Perform essential checks before each operation for safety and performance.
