EasyManua.ls Logo

Husqvarna CTH126 User Manual

Husqvarna CTH126
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CTH126
Instruction manual
Please read these instructions care-
ful ly and make sure you understand
them before using this machine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorg-
fältig durch und vergewissern Sie sich,
daß Sie diese verstehen, bevor Sie die
Maschine in Betrieb nehmen.
Manuel d’instructions
Merci de lire trés attentivement le man-
uel d'instructions. Assurez-vous d'avoir
tout compris avant d'utiliser ce tracteur.
Manual de las instrucciones
Por favor lea cuidadosamente y com-
prenda estas intrucciones antes de
usar esta maquina.
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed ac-
certatevi di averle comprese bene.
Instructieboekje
Lees deze instructies aandachtig en
zorg dat u ze begrijpt voordat u deze
ma chine gebruikt.

Table of Contents

Other manuals for Husqvarna CTH126

Question and Answer IconNeed help?

Do you have a question about the Husqvarna CTH126 and is the answer not in the manual?

Husqvarna CTH126 Specifications

General IconGeneral
BrandHusqvarna
ModelCTH126
CategoryLawn Mower
LanguageEnglish

Summary

Safety Rules

I. Training

Learn and understand controls and proper use of equipment before operating.

II. Preparation

Steps to take before starting operation to reduce risks like fire and injury.

III. Operation

Guidelines for safe operation, including slopes, attachments, and operator safety.

IV. Maintenance and Storage

Procedures for keeping the machine in safe working condition and proper storage.

Technical Specifications

Engine and Performance Specs

Details on engine power (hp/kw) and maximum speed (km/h).

Dimensions and Weight

Specifications for cutting width (cm), cutting height (mm), and machine weight (KG).

Noise and Vibration Levels

Measured sound power levels (LpA, LwA) and vibration levels (m/s²).

Symbols and Controls

Control Symbols Identification

Explains symbols for gear selection, engine state, and parking brake.

Indicator Symbols Identification

Explains symbols for choke, fuel, oil pressure, and battery status.

Safety Symbols Identification

Explains symbols for caution, danger, warnings, hot surfaces, and load limits.

Safety Symbols and Warnings

Operational Restrictions and Hazards

Warnings about operating on slopes and keeping clear of moving parts.

Maintenance and Fire Safety Symbols

Symbols related to fire risk due to debris and mower lift operation.

General Safety Warnings

Warnings to read manuals and be cautious of moving parts like belts.

Hazard Warnings

Chemical and Electrical Hazards

Warnings about explosive gases, sulfuric acid, and eye protection.

Battery Handling Precautions

Instructions for keeping children away, not tipping, and not opening the battery.

Assembly Procedures

Steering Wheel and Extension Shaft Assembly

Steps for assembling the steering wheel and its extension shaft.

Seat Installation and Adjustment

Procedures for installing and adjusting the operator's seat for comfort.

Battery Installation

Steps for correctly installing the tractor battery.

Hood Vent Attachment

Instructions for attaching the hood vent to the tractor.

Bagger Assembly

Frame and Cover Assembly

Steps for assembling the bagger frame tubes and cover components.

Handle, Deflector, and Lever Installation

Procedures for installing the bagger handle, grass deflector, and lever mechanism.

Cover Panel and Component Installation

Steps for installing the bagger cover panel and related tractor components.

Bagger Mounting Procedures

Multilingual procedures for assembling the grass collector and its parts.

Functional Description: Controls

Control Identification and Location

Identifies and locates various tractor controls and their functions.

Functional Description: Throttle and Choke

Throttle and Choke Control Operation

Explains how the throttle and choke controls regulate engine and blade speed.

Driving Operations

Pedal Operation for Movement and Cutting

Details on using clutch/brake and drive pedals for movement and cutting unit engagement.

Cutting Unit Height Adjustment

Instructions for quickly raising or lowering the cutting unit.

Reverse Operation System (ROS)

Using the Reverse Operation System

How to enable and use the ROS feature for safe reverse operation.

Driving and Cutting Tips

General Cutting Tips

Advice on cutting grass, including avoiding wet grass and cleaning the unit.

Driving Safety: Slopes

Slope Operation Warnings and Precautions

Critical safety warnings regarding operating the tractor on slopes.

Stopping the Engine

Engine Shutdown Procedure

Steps for safely shutting down the engine and removing the ignition key.

Ignition Key Safety Warning

Warning against leaving the ignition key in the machine when unattended.

Maintenance Procedures

Maintenance Safety Precautions

Essential safety steps before performing any maintenance or repair.

Engine Hood Removal and Installation

Instructions for removing and reinstalling the engine hood.

Routine Maintenance Tasks

Regular checks for oil level, bolts, battery, and cleaning air screen.

Engine Oil Change Procedure

Step-by-step guide for draining and refilling the engine oil.

Service Record and Schedule

Service Record Log

Area to log dates of completed maintenance services.

Maintenance Schedule

Recommended service intervals for various maintenance tasks.

Operator Presence and Reverse Operation Systems (ROS)

System Functionality Checks

How to verify the proper operation of presence and ROS safety systems.

Blade Maintenance

Blade Sharpening and Replacement

Guidance on keeping mower blades sharp and replacing them correctly.

Drive Belt Replacement

Drive Belt Removal Procedure

Steps for safely removing the mower drive belt.

Drive Belt Installation Procedure

Steps for correctly installing the new mower drive belt.

Mower Leveling

Visual Side-to-Side Adjustment

Method for visually adjusting mower deck levelness side-to-side.

Precision Side-to-Side Adjustment

Detailed procedure for precise side-to-side mower deck leveling.

Front-to-Back Deck Adjustment

Procedure for adjusting the mower deck level from front to back.

Brake System Check

Brake Check Procedure

How to check the tractor's braking system for proper function.

Transaxle Maintenance

Transaxle Cooling System Maintenance

Instructions for keeping the transaxle cooling fan and fins clean.

Transaxle Pump Fluid Information

Information regarding transaxle fluid and maintenance requirements.

Service Reminder and Hour Meter

Service Reminder Operation and Checks

Explains the function of the service reminder and how it indicates maintenance needs.

Deck Washout Port Usage

Deck Washout Port Procedure

Step-by-step guide for using the deck washout port to clean the mower deck.

Troubleshooting

Engine Starting and Running Problems

Common issues related to engine starting and uneven running.

Electrical and Charging System Issues

Problems with battery charging, lighting, and fuses.

Cutting, Vibration, and Mechanical Issues

Troubleshooting for uneven cutting, vibrations, and loose components.

Fuel System and Ignition Problems

Issues related to fuel supply, carburetor, and ignition settings.

Troubleshooting Engine and Fuel System

Further troubleshooting for engine performance and fuel system issues.

Troubleshooting Electrical and Mechanical Systems

Diagnosing problems with battery, lights, vibrations, and cutting.

Storage and Service

End of Season Storage Procedures

Steps for preparing the tractor for storage after the mowing season.

Service Information

Information needed for ordering parts and contacting service centers.

Related product manuals