EasyManua.ls Logo

Husqvarna EZ 17 - Cleaning and Washing; Caster Wheels

Husqvarna EZ 17
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
English-51
Cleaning and Washing
Regular cleaning and washing, especially
under the mower deck, will increase the
machine’s life span. Make it a habit to clean the
machine directly after use (after it is cooled),
before the dirt sticks.
Do not spray water on the top of the mower
deck. Use compressed air to clean the top side
of mower deck. Regularly clean deck and
underside of the deck with normal water
pressure. Do not use a high pressure washer
or steam cleaner. Avoid spraying engine and
electrical components with water
Do not rinse hot surfaces with cold water. Let
unit cool before washing.
Caster Wheels
Check every 200 hours. Check that wheels
rotates freely. If wheels do not rotate freely
take the unit to your dealer for service.
Foam filled tires or solid tires will void the
warranty.
Removal and installation of caster wheel
1. Remove nut and caster bolt.
2. Pull the wheel out of the fork and take
care of the sleeve.
3. Install in reverse order. Tighten caster
bolt.
8011-644-01
Cleaning
Use protective glasses when
cleaning and washing.
1
2
3
Caster wheels
1. Nut
2. Bolt
3. Sleeve
IMPORTANT INFORMATION
DO NOT add any type of tire liner or foam
fill material to the tires. Excessive loads
created by foam filled tires will cause
premature failures.
Only use O.E.M. specified tires.

Table of Contents

Related product manuals