Need help?Do you have a question about the Husqvarna AUTOMOWER EPOS and is the answer not in the manual?
General| Cutting Width | 24 cm |
|---|---|
| Cutting Height | 20-60 mm |
| GPS-assisted Navigation | Yes |
| App Control | Yes |
| Pin Code | Yes |
| Lift Sensor | Yes |
| Tilt Sensor | Yes |
| Weather Timer | Yes |
| Frost Sensor | Yes |
| Weather Resistance | Yes |
| Smart Navigation | Yes |
| Battery Type | Li-Ion |
| Typical Mowing Time on One Charge | 60-100 minutes |
| Sound Level | 58 dB |
| Guide Wire | No |
| Boundary Wire | No |
| Connectivity | Cellular, Wi-Fi, Bluetooth |
| EPOS Technology | Yes |
| Operating Time | 60-100 minutes |
| Noise Level | 58 dB |
Crucial safety guidelines for operating the product and protecting users and property.
Important warnings and precautions regarding the product's lithium-ion battery.
Essential instructions for safe operation, maintenance, and repair of the product.
Safety precautions for cleaning, blade replacement, and general maintenance.
Advice on choosing the best placement for the charging station for reliable docking.
Advice on positioning the virtual guide for optimal navigation and charging.
Practical steps for physically mounting and connecting the charging station.
Specific steps for mounting the reference station securely onto a post.
Detailed instructions for installing the reference station onto a wall surface.
Defines what a 'Site' contains, such as work areas, stay-out zones, and virtual guides.
Detailed guide on creating a work area by defining its virtual boundary.
Creating custom schedules for the product's operation.
Enabling or disabling GPS assisted navigation for improved positioning.
Changing the product's Personal Identification Number for security.
Guidelines for correctly defining the virtual boundary for the work area.
Step-by-step guide covering the entire installation process for the robotic mower.
Initial setup steps after powering on the product for the first time.
Step-by-step process for creating a new 'Site' in the EPOS app.
Configuring theft protection features like time lock, PIN code, and alarms.
Overview of the sequential steps required for a complete product installation.
Instructions for installing the reference station on a post or wall.
How to correctly orient the charging station for the mower's entry.
Setting up a virtual fence using GPS to prevent theft.
Guidance on selecting an optimal location for the reference station for signal reception.
How to use the appDrive feature for manual control and site installation.
Explains how a work area is defined by the virtual boundary and cannot be edited.
Detailed instructions for correctly installing the charging station.
Configuring theft protection features like time lock, PIN code, and alarms.
Overview of the dashboard displaying product status, battery, and shortcuts.
Adjusting the product's operating times and days for optimal mowing.
Explains the three methods the product uses to locate its charging station.
Instructions for safely charging the product's battery using the designated station.
Procedures for starting the product using the main switch and the Automower Connect app.
How to stop the product immediately using the STOP button.
Procedure for completely turning off the product using the main switch.
Detailed instructions on how to safely replace the mower's blades.
Step-by-step process for changing the cutting blades for optimal performance.
Information on battery safety, usage, and care, including winter storage recommendations.
Lists common information messages, their causes, and suggested actions.
A guide to diagnosing and resolving common issues based on observed symptoms.
A table listing common fault messages, their causes, and recommended actions.
Specifications for dimensions, electrical systems, and power supply of the product.
Details the product's warranty coverage, terms, and conditions for claims.
To Next Page