If the same message is repeated several times,
this may indicate that an adjustment to the
installation or the product is required. Refer to
Installation on page 17
.
3.8.9 Husqvarna Fleet Services
™
Husqvarna Fleet Services
™
is a cloud solution
that gives the commercial fleet manager an
overview of all products. It also gives the fleet
manager the possibility to control all products
remotely. Husqvarna Fleet Services
™
is included
for Automower
®
EPOS. For more information
about Husqvarna Fleet Services
™
, refer to
www.husqvarna.com.
3.8.9.1 To connect to the product with Husqvarna
Fleet Services
™
1. Download the Husqvarna Fleet Services
™
app and Automower
®
Connect app to your
mobile device.
2. Create a Husqvarna Fleet Services
™
account (www.husqvarna.com).
3. Log on to the Husqvarna Fleet Services
™
app.
4. Set the Main switch on the product to
position
1
.
Note: The Bluetooth
®
pairing mode is active
for 3 minutes. If pairing has not been
successful within this time period, switch off
the product. Wait until the LED status
indicator is not lit, and then switch on the
product again.
5. Select the plus sign (+) in the Husqvarna
Fleet Services
™
app.
6. Select
Automower
®
and then
Automower
®
Pro
. The Husqvarna Fleet Services
™
app
searches for available products within short-
range (Bluetooth
®
).
7. Select product.
8. Select
Acquire pairing code
to connect the
product to your Husqvarna Fleet Services
™
account.
9. Obey the instructions in the Husqvarna Fleet
Services
™
app.
Note:
It is only necessary to pair Husqvarna Fleet
Services
™
app and the product once.
1460 - 002 - 06.04.2020 Installation - 39
To Next Page
Loading...
