Why did my Husqvarna Automower 415X alarm and shut down?
If your Husqvarna Lawn Mower displays 'Alarm! Mower shut down', it means the alarm has been activated as the product is shut down. Adapt the security level of the product in the Security menu.
What to do if the Husqvarna Automower 415X has a blue flashing light?
If your Husqvarna Lawn Mower is showing a blue flashing light, it could be due to a couple of reasons. First, the boundary loop might not be properly connected to the charging station. Make sure the boundary wire connectors are correctly fitted. Alternatively, there might be a break in the boundary loop. If so, locate the break, replace the damaged section with a new loop wire, and splice it using an original coupler.
Why is my Husqvarna Automower 415X Lawn Mower charging station showing a red flashing light?
A red flashing light on your Husqvarna Lawn Mower charging station indicates an interruption in the charging station’s antenna. Unfortunately, I cannot provide specific troubleshooting steps for this issue. Please contact your local Husqvarna representative for assistance.
Why does my Husqvarna Automower 415X vibrate?
If your Husqvarna Lawn Mower is vibrating, it could be due to several reasons related to the cutting system. Damaged blades can cause imbalance, so examine the blades and screws, replacing them if necessary. Also, check that only one blade is attached at each screw, as too many blades in the same position can cause imbalance. Finally, different thicknesses of blades can also lead to vibration, so ensure all blades are of the same thickness and replace them if needed.
Why does my Husqvarna Lawn Mower say no loop signal?
If your Husqvarna Lawn Mower displays 'No loop signal', several factors could be responsible. A broken boundary wire is a common cause; inspect the LED on the charging station to confirm this and replace any damaged sections with a new wire and original coupler. Also, ensure the boundary wire connectors are securely attached to the charging station, replacing them if damaged. Check that the power supply and low voltage cables are correctly connected and undamaged. If the LED on the charging station isn't lit, verify the wall socket connection and check for tripped earth-fault breakers. If the product and charging station are not paired, generate a new loop signal. In case the boundary wire is crossed on its way to and from an island, ensure it is properly laid out. Disturbances from metal ...
What does connection changed mean on my Husqvarna Lawn Mower?
New loop signal successfully changed.
How to fix Husqvarna Automower 415X slope too steep error?
If your Husqvarna Lawn Mower is displaying 'Slope too steep', it means the mower stopped because the slope is too steep. Calibrate the tilt sensor. If that doesn't resolve the issue, consider changing the boundary wire installation to exclude the steep part of the work area.
How do I improve the GPS signal on my Husqvarna Automower 415X Lawn Mower?
If your Husqvarna Lawn Mower is displaying 'Weak GPS signal', it means that the GPS signal is blocked in large parts of the work area. If possible, remove any objects that are blocking the signal. If that is not possible, disable the GPS navigation function and use the lawn coverage function instead.
How to fix no loop signal on my Husqvarna Automower 415X Lawn Mower?
If your Husqvarna Lawn Mower displays a 'no loop signal' error, several factors could be responsible. First, ensure the power supply and low-voltage cable are correctly connected and undamaged. If the LED status indicator on the charging station isn't lit, examine the wall socket connection and the residual-current device. Also, verify the boundary wire connectors are properly fitted to the charging station, replacing them if damaged. If the LED status indicates a break in the boundary wire, replace the damaged section with new loop wire, splicing it with an original coupler. If ECO mode is on and the mower tried to start outside the charging station, place it in the station, start it, and close the hatch. Check that the boundary wire isn't crossed on its way to or from an island, ensuring...
How to fix Husqvarna Lawn Mower guide not found?
If your Husqvarna Lawn Mower is displaying 'Guide not found', it could be due to several reasons. Check that the guide wire connector is tightly connected to the charging station. A break in the guide wire could also be the problem; find the break and replace the damaged section using a new loop wire and an original coupler. Finally, ensure that the guide wire is correctly connected to the boundary loop.
Basic information about the product and how to get support.
Overview of the robotic lawn mower's features, cutting technique, and charging.
Visual guide identifying all the main components and parts of the robotic lawn mower.
Explanation of the product's display and keypad buttons for operation.
Explanation of safety and operational symbols found on the product, display, and battery.
Guidance on how to read the manual, including text formatting conventions.
Visual representation of the product's menu hierarchy and navigation path.
Visual representation of the product's menu hierarchy and navigation path.
Defines safety terminology and provides essential general safety guidelines.
Safety precautions for installation, operation, maintenance, and battery usage.
Instructions on how to safely lift and move the robotic lawn mower.
Introduction to installation, components, and general preparations.
Guidance on preparing for wire installation, including location examination.
Steps for the physical installation of the robotic lawn mower and its components.
Instructions for positioning, securing, and extending the boundary and guide wires.
Steps to perform after installation, including visual checks and basic settings.
Overview of product settings accessible via keypad or app.
Information about the mobile app for controlling and monitoring the product.
Configuring advanced settings via the product's interface.
Instructions on how to turn the product ON and OFF using the designated button.
Steps to start the product and select an operating mode (Main, Secondary, Override, Spot).
Instructions on how to safely park the product.
How to stop the product and completely switch it off.
Instructions on how to properly charge the product's battery.
Introduction to the importance of regular maintenance for product longevity.
Guidelines for cleaning the product's chassis, blade disc, wheels, body, and charging station.
Procedure for replacing worn or damaged blades for optimal performance.
Information on battery care, lifespan, and replacement.
Recommendations for winter service to maintain the product during off-season.
Introduction to the troubleshooting chapter and resources for help.
List of fault messages displayed by the product and their causes/actions.
Explanation of information and warning messages shown on the product display.
Interpreting the indicator lamp colors on the charging station for status.
Guide to diagnosing and resolving common product symptoms and issues.
Procedure for locating and repairing breaks in the boundary or guide wire.
Regulations and requirements for transporting the product, especially batteries.
Guidelines for safely storing the product, including battery and charging station.
Information on how to properly dispose of the product and its components.
Detailed technical specifications for the Automower models, including dimensions and electrical data.
Information about registered trademarks and their ownership.
Details of the product's warranty coverage, terms, and conditions.
General| Cutting width | 22 cm |
|---|---|
| Cutting height min | 20 mm |
| Cutting height max | 50 mm |
| Battery type | Li-Ion |
| Typical charging time | 60 min |
| Maximum slope performance inside installation | 40% |
| Maximum area capacity | 1500 m² |
| Battery voltage | 18 V |
| Battery capacity | 2.0 Ah |
| Connectivity | Bluetooth, Cellular |
| Weather resistance | Yes |
| Anti-theft system | PIN code, Alarm, GPS tracking |
| Blade type | Pivoting razor blades |
| Typical mow time on one charge | 60 minutes |
To Next Page
