EasyManuals Logo

Husqvarna Automower 415X User Manual

Husqvarna Automower 415X
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
1 Introduction
1.1 Introduction
Serial number:
Product number:
PIN code:
The serial number and the product number are on the product rating plate and on the product carton.
Register your product on www.husqvarna.com. Enter the serial number of the product, the product number and
the date of purchase to register your product.
1.1.1 Support
For support about the product, speak to your Husqvarna
servicing dealer.
1.1.2 Product description
Note: Husqvarna regularly updates the appearance
and function of the products. Refer to
Support on page
3
.
The product is a robotic lawn mower. The product has a
battery power source and cuts the grass automatically. It
continuously alternates between mowing and charging.
The movement pattern is random, which means that the
lawn is mowed evenly and with less wear. The boundary
wire and the guide wire controls the movement of the
product within the work area. Sensors in the product
senses when it is approaching the boundary wire. The
front of the product always passes the boundary wire
by a specific distance before the product turns around.
When the product hits an obstacle or approaches the
boundary wire the product selects a new direction.
The operator selects the operation settings with the keys
on the keypad. The display shows the selected and
possible operation settings, and the operation mode of
the product.
1.1.2.1 Mowing technique
The product is emission free, easy to use and saves
energy. The frequent cutting technique improves the
grass quality and decreases the use of fertilizers.
Collection of grass is not necessary.
1.1.2.2 Find the charging station
The product operates until the battery state of charge
is low, then the product starts to go to the charging
station. The guide wire is put from the charging station
to a remote part of the work area or through a narrow
passage. The guide wire is connected with the boundary
wire to make it easier and faster for the product to find
the charging station.
1.1.2.3 Automower
®
Connect
Automower
®
Connect is a mobile application that makes
it possible to select the operation settings remotely.
Refer to
Automower
®
Connect app on page 20
.
1.1.2.4 Automower
®
Intellegent Mapping (AIM)
Automower
®
Intellegent Mapping (AIM) is available
in the Automower
®
Connect app. Use Automower
®
Intellegent Mapping (AIM) to make a virtual map of your
lawn and installation. In the map you can make virtual
work areas and stay-out zones. Refer to
Automower
®
Intellegent Mapping (AIM) on page 21
.
1650 - 005 - 17.03.2022
Introduction - 3

Other manuals for Husqvarna Automower 415X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husqvarna Automower 415X and is the answer not in the manual?

Husqvarna Automower 415X Specifications

General IconGeneral
Cutting width22 cm
Cutting height min20 mm
Cutting height max50 mm
Battery typeLi-Ion
Typical charging time60 min
Maximum slope performance inside installation40%
Maximum area capacity1500 m²
Battery voltage18 V
Battery capacity2.0 Ah
ConnectivityBluetooth, Cellular
Weather resistanceYes
Anti-theft systemPIN code, Alarm, GPS tracking
Blade typePivoting razor blades
Typical mow time on one charge60 minutes

Related product manuals