3.7.2.1 To set the unit format
1. Select the unit format
Metric
or
Imperial
.
3.7.3 My mowers
When choosing
My mowers
you can manage all
the products paired to your account, as well as
add new ones. If there are several paired
products it is possible to select one of them as
Current mower
.
To pair a new product to the Automower
®
Connect app:
1. Select the plus sign (+).
2. Select model.
3. Follow the instructions in the Automower
®
Connect app to finalize the pairing.
3.7.4 Automower
®
Direct
Automower
®
Direct uses short-range Bluetooth
®
communication, and is included in Automower
®
EPOS.
Automower
®
Direct is useful if the operator has
the Automower
®
Connect app and the PIN code,
but has not created a Husqvarna account.
Automower
®
Direct is also useful if the
connection with the product is only temporary.
Husqvarna cannot guarantee the time period or
coverage of the long-range cellular connectivity.
There is therefore a possibility to communicate
with the product through Bluetooth
®
if you are in
short-range of the product. You can use
Automower
®
Direct without a Husqvarna account
as long as you have the product PIN code.
Note:
The Automower
®
Direct connection is only
valid as long as you are within Bluetooth
®
range.
If you move out of Bluetooth
®
range, you will
loose the Automower
®
Direct connection and you
must do the connection process again.
3.7.4.1 To start to use Automower
®
Direct
1. Download the Automower
®
Connect app on
your mobile device.
2. Select Automower
®
Direct on the start
screen of the Automower
®
Connect app.
3. Start Bluetooth
®
on your mobile device and
on the product, refer to
To do the basic
settings on page 27
.
4. Select the product to pair with in the
Automower
®
Connect app.
5. Enter the PIN code for the product.
Note: You have access to the menus and
functions as long as you are within Bluetooth
®
short-range.
3.7.5 Map
The map shows the current position of the
product and the set centerpoint for GeoFence.
3.7.5.1 Map settings
1. Open
Map
in the main menu.
2. Select the settings symbol.
3. Enable or disable
Movement path
.
4. Enable or disable
GeoFence radius
.
5. Select
Map view
or
Satellite view
.
3.8 Settings in Automower
®
Connect
The product has factory settings but
the settings can be adapted to each
work area.
3.8.1 Schedule
In
Schedule
you can change the
schedule settings for the product.
The schedule function controls which hours the
product should operate and not operate. When
the product is not operating it is parked in the
charging station. The operating hours and days
can be seen in an overview in the Automower
®
Connect app.
The default schedule setting allows the product to
operate around the clock 7 days a week. This is
normally a suitable setting for a work area
corresponding to the maximum capacity. If the
work area is less than the maximum capacity the
schedule should be used to minimize wear on the
grass and to the product.
To calculate the schedule setting, refer to
To
calculate the schedule setting on page 33
.
3.8.1.1 To edit the schedule settings
1. Select
Settings > Schedule > Edit
in the app.
2. Select the pencil symbol in the app.
3. Select which days of the week and hours the
product must operate.
4. Select
Save
.
32
- Installation
1460 - 002 - 06.04.2020
To Next Page
Loading...
