10 EC Declaration of Conformity
10.1 EC Declaration of Conformity
Husqvarna AB, SE-561 82 Huskvarna, Sweden,
tel: +46-36-146500, declares that the robotic
lawn mowers Automower
®
EPOS and with serial
numbers dating 2020 week 3 and onwards (the
year and week is clearly stated on the rating
plate, followed by the serial number), comply with
the requirements of the COUNCIL’S DIRECTIVE:
• Directive “relating to machinery”
2006/42/EC.
• Particular requirements for robotic
battery powered electrical lawn mowers
EN 50636-2-107: 2015
• Electromagnetic fields EN 62233: 2008.
• Directive on ”restriction of use of certain
hazardous substances” 2011/65/EU.
• The following standard is applied: EN
50581:2012
• Directive “relating to noise emissions from
outdoor equipment” 2000/14/EC. Refer to
Technical data on page 60
for information
regarding noise emissions and the cutting
width.
The notified body 0404, RISE SMP Svensk
Maskinprovning AB, Box 7035, SE-750 07
Uppsala, Sweden, has issued a report regarding
the assessment of conformity according to annex
VI to the Council’s Directive of May 8, 2000
“relating to noise emissions into the environment”
2000/14/EC. The certificate is numbered: for
Automower
®
EPOS (01/901/296) and
(01/901/291):
• Directive “relating to radio equipment”
2014/53/EU. The following standards have
been applied:
• ETSI EN 303 447 V1.1.1
• ETSI EN 300 328 V2.1.1
• ETSI EN 300 220-1 V3.1.1
• ETSI EN 300 220-2 V3.1.1
• ETSI EN 301 511 V12.5.1
• ETSI EN 301 908-2 V.11.1.1
• ETSI EN 301 908-13 V11.1.2
• Electromagnetic compatibility:
• ETSI EN 301 489-1
• ETSI EN 301 489-3
•
ETSI EN 301 489-17
• ETSI EN 301 489-19
• ETSI EN 301 489-52
Husqvarna, 2020-04-02
Lars Roos
Global R&D Director, Robotic category
(Authorized representative for Husqvarna AB and
responsible for technical documentation.)
64 - EC Declaration of Conformity 1460 - 002 - 06.04.2020
To Next Page
Loading...
