1.8 Symbols in Automower
®
Connect
The schedule menu is used to set
when the product cuts the lawn.
The cutting height menu allows the
operator to set the cutting height of the
product.
The operation menu is used for
manual settings for the operation.
The installation menu is used for
manual settings for the installation.
The accessories menu is used for
settings made for the accessories.
The settings menu is used to set the
general product settings. (Only
available for Bluetooth
®
short-range
connectivity)
The security menu lets the operator
select between 3 security levels. (Only
available for Bluetooth
®
short-range
connectivity)
Automower
®
Connect is where the
operator enables and disables the
Automower
®
Connect module on the
product. (Only available for Bluetooth
®
short-range connectivity)
1.9 Symbols on the battery
Read the user instructions.
Do not discard the battery into fire and
do not expose the battery to a heat
source.
Do not immerse the battery into water.
1.10 General safety instructions
The following system is used in the Operator’s
Manual to make it easier to use:
• Text written in
italics
is a text that is in the
Automower
®
Connect app, or is a reference
to another section in the Operator’s manual.
• Text written in bold is one of the buttons on
the product.
• Text written in
UPPERCASE
and
italics
refer
to the different operating modes available in
the product.
1460 - 002 - 06.04.2020
Introduction - 7
To Next Page
Loading...
