2.3.2 Battery safety
WARNING: Lithium-ion batteries can
explode or cause fire if disassembled,
short-circuited, exposed to water, fire,
or high temperatures. Handle carefully,
do not dismantle, open the battery or
use any type of electrical/mechanical
abuse. Avoid storage in direct sunlight.
For more information about the battery, refer to
Technical data on page 60
2.3.3 How to lift and move the product
To safely move the product from or in the work
area the product can be lifted or operated with
appDrive. Refer to
How to lift the product on page
15
and
To operate the product with appDrive on
page 28
.
WARNING: The product must be
switched off before lifting it. The
product is disabled when the Main
switch is in position
0
.
CAUTION: Do not lift the product when
it is parked in the charging station. It
can damage the charging station
and/or the product. Push STOP and
pull the product out of the charging
station before lifting it.
2.3.3.1 How to lift the product
1. Push the STOP button to stop the product.
2. Set the main switch in position
0
.
3. Carry the product by the handle with the
blade disc away from the body.
2.3.4 Maintenance
WARNING: When the product is
turned upside down the main switch
must always be in the
0
position.
The main switch should be set in the
0
position before all work on the chassis
of the product, such as cleaning or
replacing the blades.
CAUTION: Never use a high-pressure
washer or even running water to clean
the product, charging station and
reference station. Never use solvents
for cleaning.
CAUTION: Use the plug to disconnect
the charging station before any
cleaning or maintenance of the
charging station.
Inspect the product each week and replace any
damaged or worn parts. Refer to
Maintenance on
page 43
.
1460 - 002 - 06.04.2020
Safety - 15
To Next Page
Loading...
