Husqvarna EZ4824 - Kawasaki Engine

MAINTENANCE
Husqvarna-41
Kawasaki Engine
Remove the plastic fastener on the top of 1.
the air lter cowling and remove the air lter
cowling.
Remove the foam rubber pre-lter and clean 2.
using a mild detergent. Squeeze it dry with a
clean cloth.
WARNING!
The engine and the exhaust system
become very hot during operation.
There is a risk for burns if touched.
Allow engine and exhaust system to
cool at least two (2) minutes.
8011-557
Remove pre-lter
8011-768
Remove the air lter cowling
8011-558
Remove paper lter
Remove the wing nuts for the air lter and 3.
remove the paper lter.
IMPORTANT INFORMATION
Do not use compressed air to clean the air
lter.
Do not wash the paper lter.
Do not oil the paper lter.