Husqvarna FS 4800 D - User Manual

Operator’s manual
Read these instructions carefully and make sure
you understand them before using the FS 4800.
Manuel d’utilisation
Veuillez lire attentivement ces instructions et assurez-vous deVeuillez lire attentivement ces instructions et assurez-vous de
bien les comprendre avant d’utiliser la machine modèle FS 4800.
Manual del operador
Lea cuidadosamente estas instrucciones y asegúrese
de que las comprende bien antes de usar el FS 4800.
FS 4800 D

Summary

Safety Warnings and Guidelines

Dos and Do Nots

Essential safety instructions, guidelines, and prohibitions for operation.

Spanish Safety Warnings

Advertencias de seguridad en español sobre qué hacer y qué no hacer.

French Safety Warnings

Consignes de sécurité en français sur les actions à faire et à ne pas faire.

Specific Hazard Warnings

Poison Exhaust Gas and Hearing Hazards

Warnings about poisonous exhaust gases and high noise levels.

Dust and Health Warnings

Dust Warning and California Prop 65

Information on dust hazards, silica exposure, and health warnings.

Technical Data

Sound Level, EMC, and Vibration Data

FS 4800 D Diesel Specifications

Standard and CE Model Features

Pre-Operation and Maintenance

Pre-Operation Checklist

Steps to perform before operating the machine.

Scheduled Maintenance Reference

Guide for routine maintenance tasks based on operating hours.

Operator Controls and Indicators

Operator Procedures

Machine Uses and Moving Instructions

Operational Procedures

Transport and Pre-Start Checks

Blade Installation and Starting

Fitting the Blade and Starting the Saw

Step-by-step instructions for blade installation and safe engine starting.

Saw Operations and Adjustments

Stopping Saw, Incidents, and Adjustments

Procedures for stopping, troubleshooting, and adjusting the saw.

Maintenance Procedures

Lubrication, Hydraulic, and Cooling System Maintenance

Maintenance for engine oil, hydraulics, gearbox, and cooling systems.

Air Filter Maintenance

Procedure for cleaning or replacing the air filter element.

Maintenance and Advice

V-Belt Tension and Hydraulic System Service

Instructions for V-belt tension and hydraulic system servicing.

Important Advice for Safe Operation

Speed Adjustment Procedures

Engine, Blade Shaft, and Gearbox Speed Settings

Wiring Diagrams

Diagram 1: Front Pivot Control Box Wiring

Diagram 2: Rear Pivot Control Box Wiring

Diagram 3: Engine Wiring Diagram

Diagram 4: Front Pivot Cowl Wiring

Diagram 5: Rear Pivot Cowl Wiring

Ladder Diagrams

Diagram 6: Front Pivot Electrical Ladder Diagram

Diagram 7: Rear Pivot Electrical Ladder Diagram

Component Designators

Front Pivot Component Designators

Rear Pivot Component Designators

Hydraulic Schematic

FS4800 D Hydraulic System Diagram

Husqvarna FS 4800 D Specifications

General

Brand	Husqvarna
Model	FS 4800 D
Category	Industrial Equipment
Language	English