To Next Page
Q
qcostaAug 15, 2025
How to fix a Husqvarna LB 146i Lawn Mower when the green LED is flashing?
- BBrian SmithAug 15, 2025
If the green LED is flashing on your Husqvarna Lawn Mower, it means the battery voltage is low. You should charge the battery.
How to fix a Husqvarna LB 146i Lawn Mower when the green LED is flashing?
If the green LED is flashing on your Husqvarna Lawn Mower, it means the battery voltage is low. You should charge the battery.
Why is the error LED flashing on my Husqvarna LB 146i Lawn Mower?
The error LED may flash on your Husqvarna Lawn Mower due to several reasons: the battery could be weak (charge the battery); the temperature in the work environment might be too high or too low (use the battery in temperatures between -10°C and 40°C); or there could be overvoltage (ensure the mains voltage matches the rating plate on the product). If none of these apply, remove the battery from the charger, wait 5 seconds, and try charging again. If the issue persists, contact an approved service agent.
What to do if the error LED flashes twice on my Husqvarna LB 146i keypad?
If the error LED flashes twice on your Husqvarna Lawn Mower keypad, it indicates that the blade is blocked. To resolve this, turn the safety key to 0 to prevent accidental starts, remove the battery, and wait at least 5 seconds. Then, check to ensure the blade can rotate freely. If the problem persists, contact an authorized service agent.
Why does my Husqvarna LB 146i Lawn Mower stop and flash 8 times?
If your Husqvarna Lawn Mower stops and the error LED flashes 8 times, it likely means the battery is weak. Charge the battery to resolve this issue.
What should I do if the error LED flashes 10 times on my Husqvarna Lawn Mower keypad?
If the error LED flashes 10 times on your Husqvarna Lawn Mower keypad, it indicates that the motor control is too hot. Stop the motor and allow it to cool down.
How do I fix Error LED flashing 3 times on my Husqvarna LB 146i?
If the error LED flashes 3 times on the keypad of your Husqvarna Lawn Mower, the motor is overloaded. Increase the cutting height to resolve this.
What to do if the error LED flashes on my Husqvarna LB 146i battery charger?
If the error LED is flashing on your Husqvarna Lawn Mower battery charger, the temperature in the work environment is too high or too low. Use the battery charger in temperatures between 5°C and 40°C.
What does it mean if my Husqvarna Lawn Mower stops and flashes 0 times?
If your Husqvarna Lawn Mower stops and flashes 0 times, it indicates a battery connector failure. Examine the battery connector to address this issue.
What does it mean when the error LED is constantly on on my Husqvarna Lawn Mower?
If the error LED is constantly on on your Husqvarna Lawn Mower, it means that the cell difference is too much (1V). Contact an approved service agent.
Overall safety rules for operating the product.
Safety measures for the environment where the product is used.
General safety advice during product use.
Recommended gear for safe product operation.
Information on safety features and checks.
Safety rules for handling and using the product's battery.
Safety precautions for using the battery charger.
Safety measures before performing maintenance.
How to start the mower and use the SavE feature.
Covers examining and replacing parts like the blade.
Common battery problems and solutions.
General| Cutting Width | 46 cm |
|---|---|
| Cutting Height Adjustment | Central |
| Cutting Height Positions | 6 |
| Weight | 16.5 kg |
| Battery Voltage | 36 V |
| Drive Type | Push |
| Engine Type | Electric |
| Displacement | Not applicable |
| Fuel Tank Capacity | Not applicable |
| Cutting Height Adjustment Type | Central |
| Cutting Height Range | 20-75 mm |
| Type | Battery-powered lawn mower |
| Wheel Size | 170 mm |
