Husqvarna LC 137i User Manual (English)

Questions and Answers:

S
Samantha MckenzieAug 17, 2025
What to do if the Error LED flashes and my Husqvarna LC 137i Lawn Mower stops?
- A
  Alexandra ChavezAug 17, 2025
  If the error LED flashes and the Husqvarna Lawn Mower stops, there could be several reasons. It could be due to a battery connector failure, so you should examine the battery connector. The motor may be overloaded, so try increasing the cutting height. If the battery is weak, charge it. Also, ensure the battery is correctly placed and examine the connector if there's a battery error or no signal. If the motor brake handle was engaged before starting, release it, wait 5 seconds, and try again. If other errors occur, remove the battery and consult a service agent.
J
Julia RangelAug 20, 2025
What to do if Error LED flashes and Husqvarna LC 137i does not operate correctly?
- J
  Janice JenkinsAug 20, 2025
  If the Error LED flashes and the Husqvarna Lawn Mower doesn't operate correctly, the blade might be blocked. Turn the safety key to 0, remove the battery, wait 5 seconds, and clear any obstacles to ensure the blade rotates freely. The motor speed may be dropping too much, so increase the cutting height. Also, check if the wheels or transmission are blocked, and remove any obstructions. If the motor control is too hot, stop the motor and allow it to cool down.
S
sjacksonAug 23, 2025
What to do if the Error LED flashes and the Husqvarna Lawn Mower stops?
- L
  lyonsmelanieAug 23, 2025
  If the error LED flashes and the product stops, there could be several reasons: * **Battery connector failure:** Examine the battery connector. * **Motor overload:** Increase the cutting height. * **Weak battery:** Charge the battery. * **Battery error or no signal:** Ensure the battery is correctly inserted and examine the battery connector. If the error LED on the battery flashes, refer to the Battery charger section. * **Incorrect start:** Release the motor brake handle, wait about 5 seconds, and then push it down again to start the product.
A
Ashley DavenportAug 26, 2025
What to do if the Error LED flashes on my Husqvarna LC 137i Lawn Mower and it doesn't operate correctly?
- R
  robert53Aug 26, 2025
  If the error LED flashes and the product doesn't operate correctly, it could be due to the following reasons: * **Blade blockage:** Turn the safety key to 0, remove the battery, wait 5 seconds, and clear any obstacles to ensure the blade rotates freely. If the problem persists, contact an approved service agent. * **Motor speed drop:** Increase the cutting height.
A
Amber KramerAug 28, 2025
Why is the error LED flashing on my Husqvarna LC 137i Lawn Mower?
- L
  Lisa LeeAug 28, 2025
  If the error LED flashes on your Husqvarna Lawn Mower, the battery may be weak, so you should charge it. The temperature in the work environment may be too high or too low; use the battery in temperatures between 5 °C - 40 °C. There may be overvoltage, so make sure that the mains voltage is the same as on the rating plate on the product. You can also try removing the battery from the charger, waiting 5 seconds, and trying again. If the problem continues, speak to a service agent.
P
Peter HunterAug 31, 2025
What does it mean when the error LED is on on my Husqvarna LC 137i?
- R
  reneegambleAug 31, 2025
  If the error LED is on for your Husqvarna Lawn Mower, it could indicate that the cell difference is too much (1V). In this case, you should speak to an approved service agent.
B
barbararobertsonSep 2, 2025
How to fix a flashing green LED on a Husqvarna Lawn Mower?
- D
  Diana LeeSep 2, 2025
  If the green LED flashes on your Husqvarna Lawn Mower, the battery voltage is likely low. Charge the battery to resolve this issue.
A
Anthony SmithSep 5, 2025
Why does the Error LED flash on my Husqvarna LC 137i Lawn Mower?
- R
  Ray Sandoval DDSSep 5, 2025
  The error LED flashing indicates a problem. The possible causes are: * The battery is weak, so you should charge the battery. * The temperature is not optimal, so use the battery in temperatures between 5 °C - 40 °C. * There is overvoltage, so make sure that the mains voltage is the same as on the rating plate on the product. * If the problem continues, remove the battery from the battery charger, wait 5 seconds and try again to charge the battery. If it still does not work, speak to an approved service agent.
J
Jose RojasSep 8, 2025
What to do if the Error LED is on for Husqvarna LC 137i Lawn Mower?
- T
  Tammy RyanSep 8, 2025
  The error LED being on indicates that the cell difference is too much (1V). In this case, speak to an approved service agent.

Husqvarna LC 137i Specifications

General

Cutting Width	37 cm
Cutting Height Adjustment	Central
Cutting Height, min-max	20-60 mm
Cutting Height Steps	6
Weight	17 kg
Collector Volume	40 L
Motor Type	Brushless
Battery Voltage	36 V
Drive System	Push