Husqvarna LC 347V Workshop Manual

English – 19
Specications
5.2 Technical data 200 series
LC 247 LC 247S LC 247SP LC 253S
Engine
Engine manufacturer Briggs & Stratton Briggs & Stratton Briggs & Stratton Briggs & Stratton
Cylinder displacement, cm
3
125 125 140 163
Speed, rpm 2900 2900 2900 2800
Nominal engine output, kW
1
1.8@2900 1.8@2900 2.1@2900 2.4@2800
Ignition system
Spark plug Champion
QC12YC
Champion
QC12YC
Champion
QC12YC
Champion
XC92YC
Electrode gap, mm 0.5 0.5 0.5 0.5
Fuel and lubrication system
Fuel tank capacity, litre 0.8 0.8 0.8 1.0
Engine oil
2
SAE 30/SAE
10W-30
SAE 30/SAE
10W-30
SAE 30/SAE
10W-30
SAE 30/SAE
10W-30
Weight
Weight with empty tanks, kg 27.5 29.5 30.0 32.4
Noise emissions
3
Sound power level, measured dB (A) 96 96 94 96
Sound power level, guaranteed L
WA
dB (A) 96 96 96 97
Sound levels
4
Sound pressure level at the operators ear,
dB (A)
85 85 84 85
Vibration levels
5
Handle, m/s
2
3.4 3.4 3.4 4.0
Cutting equipment
Cutting height, mm 20-75 20-75 20-75 20-75
Cutting width, cm 47 47 47 53
Blade Collect Collect Collect Colect
Article number 5882755-10 5882755-10 5882755-10 5797972-10
Bagger capacity, litre 55 55 55 60
Drive
4 4 4
1
The power rating of the engine indicated is the average net output (at specied rpm) of a typical production engine for the engine
model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for
the engine installed on the nal machine will depend on the operating speed, environmental conditions and other values.
2
Use engine oil of quality SF, SG, SH, SJ or higher. See the viscosity chart in the engine manual and select the best viscosity
based on the expected outside temperature.
3
Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
4
Noise pressure level according to ISO 5395. Reported data for noise pressure level has a typical statistical dispersion (standard
deviation) of 1.2 dB (A).
5
Vibration level according to ISO 5395. Reported data for vibration level has a typical statistical dispersion (standard deviation) of
0.2 m/s
2
.

Husqvarna LC 347V Specifications

General

Cutting Width	47 cm
Cutting Height Adjustment	Central
Drive Type	Self-propelled
Engine Manufacturer	Briggs & Stratton
Drive Wheels	Rear
Cutting Height Min	25 mm
Cutting Height Max	75 mm
Mulch Kit	Optional
Warranty	2 years
Net Power RPM	2900 RPM
Collector Volume	55 L
Wheel Size Front	8 inch
Wheel Size Rear	200 mm