Husqvarna LC 247 - User Manual

Other manuals for Husqvarna LC 247

Workshop Manual20 pages

Questions and Answers

K
Kathy HarperJul 27, 2025
Why won't my Husqvarna LC 247 engine start?
- B
  bookermichaelJul 27, 2025
  If your Husqvarna Lawn Mower engine won't start, several factors could be at play. First, ensure the ignition cable is correctly connected to the spark plug. If that's not the issue, check the fuel tank; it might be empty and need refilling with the correct fuel type. Old fuel can also be a culprit, so drain the tank and carburetor and refuel with fresh gasoline. A dirty carburetor or fuel line can also prevent starting, requiring cleaning. Lastly, inspect the spark plug for defects—adjust the electrode gap, clean, or replace it as needed. If there is fuel on the spark plug, clean it.
Y
Yolanda MarshallAug 1, 2025
How to fix a Husqvarna LC 247 Lawn Mower engine that does not operate smoothly?
- L
  littlekarenAug 1, 2025
  If your Husqvarna Lawn Mower engine isn't operating smoothly, it could be due to several reasons. Check that the ignition cable is correctly connected to the spark plug. Also, the fuel line might be dirty, or the fuel might be old; in this case, clean the fuel line and refill the fuel tank with new fuel of the correct type. A blocked fuel tank cap can also cause issues, so ensure it's clean. Water or dirt in the fuel system can also be responsible; drain the fuel tank and refill with new fuel. A dirty air filter can also cause the engine to run rough, so clean it. If these steps don't resolve the issue, a servicing dealer may need to adjust the carburetor.
J
Joseph JacobsonAug 6, 2025
Why is my Husqvarna LC 247 Lawn Mower engine becoming too hot?
- M
  Michael AdamsAug 6, 2025
  If your Husqvarna Lawn Mower engine is overheating, it could be due to a low engine oil level. Make sure to fill the engine oil to the correct level. Insufficient airflow can also cause overheating, so clean the air filter and the air filter housing. If the problem persists, a servicing dealer may need to adjust the carburetor.
M
Michael RodriguezAug 11, 2025
What to do if my Husqvarna LC 247 engine does not stop?
- C
  Christopher LewisAug 11, 2025
  If the Husqvarna Lawn Mower engine continues to run, disconnect the ignition cable from the spark plug and let an approved service agent repair the product because the stop mechanism is defective.
J
Jeffrey HillAug 16, 2025
How to fix misfire in Husqvarna LC 247 engine at high speed?
- L
  lindsay43Aug 16, 2025
  If you're experiencing misfire in your Husqvarna Lawn Mower engine at high speed, the electrode gap in the spark plug might be too small. Adjust the electrode gap to resolve this.
A
Allison BaileyAug 21, 2025
How to troubleshoot a Husqvarna Lawn Mower engine that doesn't operate smoothly at idle speed?
- S
  Stephanie DiazAug 21, 2025
  If the Husqvarna Lawn Mower engine does not operate smoothly at idle speed, it could be due to several reasons. The spark plug might be dirty or defective, or the electrode gap might be too wide, so adjust the electrode gap or replace the spark plug. The carburetor may need adjustment. Also, a dirty air filter can cause this issue, so clean the air filter.

Summary

Safety

Safety Definitions and Product Liability

Defines safety terms and outlines the manufacturer's liability limitations for product use.

General Safety Instructions

Work Area and Operational Safety

Operational and Protective Measures

Covers safe work area preparation, operation practices, PPE, and safety device checks.

Component Safety and Maintenance Precautions

Component Safety Checks

Maintenance Safety Guidelines

Outlines essential safety precautions to be followed before performing maintenance or repairs.

Operation

Pre-Operation Checks and Fueling

Covers essential checks before starting and the procedure for safely filling the fuel tank.

Starting and Cutting Height Adjustment

Details procedures for setting cutting height and starting the engine (manual and electric).

Driving, Stopping and Battery Management

Maintenance

Maintenance Schedule and Introduction

Maintenance Procedures

Cutting Equipment and Cover Maintenance

Component Maintenance and Battery Handling

Blade Replacement and Oil Checks

Engine Oil Replacement and Battery Use

Guidance on replacing engine oil, first-time battery use, and battery charging.

Component Maintenance and Adjustments

Spark Plug and Air Filter Service

Engine Troubleshooting

Common Engine Starting and Stopping Issues

Troubleshooting guide for problems related to the engine not starting or stopping.

Engine Smoothness and Overheating Issues

Solutions for engine operational issues like rough running, overheating, and misfires.

Technical Data

LC 247, LC 247 S, LC 253 S Specifications

LC 347 V, LC 347 VE, LC 353 V, LC 353 VE Specifications

Additional Specifications for LC 347 V-353 VE Series

Husqvarna LC 247 Specifications

General

Cutting Width	47 cm
Cutting Height Min	20 mm
Cutting Height Max	75 mm
Cutting Height Steps	6
Drive System	Push
Collector Type	Fabric with dust blocker
Collector Volume	55 L
Engine Name	Briggs & Stratton 450e
Fuel Tank Volume	0.8 L
Weight	29 kg
Cutting Height Adjustment	Central
Grass Collector	Yes
Start Type	Recoil
Displacement	125 cm³
Net Power RPM	2900 rpm